3M
™
Mini D Ribbon (MDR) Connectors
.050″ Boardmount Through-Hole Right Angle Plug - Shielded
101 Series
• Wiper-on-wiper contact for reliable
repetitive plugging
• Rugged die cast metal case construction
• Screw or ground lock PCB retention
• Normal and reverse “D” interface options for
board to board flexibility
• IEEE 1284C Interface as a 36 contact connector
• Contacts: 20, 26, 36 and 50
• See Regulatory Information Appendix (RIA)
for chemical compliance information
Date Modified: November 26, 2007
TS-0620-B
Sheet 1 of 4
Physical
Insulation Material:
Flammability:
Color:
Contact Material:
Plating
Underplating:
Wiping Area:
Glass Reinforced Polyester Body
UL 94V-0
Black
Copper Alloy
80
μ″
[ 2.0
μm
] Min. Nickel
30
μ″
[ 0.76
μm
] Min. Gold
Solder Tail Plating:
Gold flash over Nickel (RIA E1 & C1 apply)
Body Material:
Zinc Alloy
Plating Nickel
Ground Lock
Material: Copper Alloy
Plating: Tin in combination with Gold flash plated tail
Marking:
3M Logo and Part Number
Electrical
Current Rating:
1 A
Insulation Resistance:
> 5
×
10
8
Ω
at 500 V
DC
Withstanding Voltage:
500 V
RMS
for 1 Minute
Environmental
Temperature Rating:
-20°C to +85°C
Process Rating:
Solder Dip Test - 260°C for 10 secs., two times after 100°C max. preheat,
60 sec. max. duration
UL File No.: E68080
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M [ 3M ELECTRONICS ]
