A-BRIGHT
A-BRIGHT INDUSTRIAL CO., LTD.
SURFACE MOUNT LED LAMPS
0805 Package White SMD Chip LED Lamps (1.0mm Height)
Part Number: AL-HW435A
Package outlines & Re-flow Profile
Reflow Temp/Time
Soldering iron
Basic spec is 5sec when 260℃. If temperature is higher,
time should be shorter (+10℃ -1sec ).Power dissipation of
iron should be smaller than 15W, and temperatures should
be controllable .Surface temperature of the device should be
under 230℃ .
ITEM
Resin (mold)
Lens color
For Reflow Soldering
Printed circuit board
Dice
Emitted color
MATERIALS
Epoxy
Yellow Diffused
BT
InGaN
White
NOTES:
1. All dimensions are in millimeters (inches);
2.
Tolerances are
±0.1mm
(0.004inch) unless otherwise noted.
3.
Soldering terminal may shift in x, y direction.
4.
Polarity referring on to the Cathode mark is reversed on the
red.
2006/10/18