MicroPower™ Regulated Charge Pump
General Description
The AAT3111 ChargePump is a MicroPower
switched capacitor voltage converter that delivers a
regulated output. No external inductor is required
for operation. Using three small capacitors, the
AAT3111 can deliver up to 150mA to the voltage
regulated output. The AAT3111 features very low
quiescent current and high efficiency over a large
portion of its load range, making this device ideal
for battery-powered applications. Furthermore, the
combination of few external components and small
package size keeps the total converter board area
to a minimum in space-restricted applications.
The AAT3111 operates in an output-regulated volt-
age doubling mode. The regulator uses a pulse-
skipping technique to provide a regulated output
from a varying input supply. The AAT3111 contains
a thermal management circuit to protect the device
under continuous output short-circuit conditions.
The AAT3111 is available in a Pb-free, surface-
mount 6-pin SOT23 or 8-pin SC70JW package and
is rated over the -40°C to +85°C temperature
range.
AAT3111
Features
•
•
•
•
•
•
•
•
•
•
•
ChargePump
™
SmartSwitch
Step-Up Type Voltage Converter
Input Voltage Range:
— AAT3111-3.6: 1.8V to 3.6V
— AAT3111-3.3: 1.8V to 3.3V
MicroPower Consumption: 20µA
3.6V, 3.3V Regulated ±4% Output
3.6V Output Current
— 100mA with V
IN
≥
3.0V
— 20mA with V
IN
≥
2.0V
3.3V Output Current
— 100mA with V
IN
≥
2.5V
— 20mA with V
IN
≥
1.8V
High Frequency 750kHz Operation
Shutdown Mode Draws Less Than 1µA
Short-Circuit/Over-Temperature Protection
2kV ESD Rating
SC70JW-8 or SOT23-6 Package
Applications
•
•
•
•
•
Battery Back-Up Supplies
Digital Cameras
Handheld Electronics
MP3 Players
PDAs
Typical Application
AAT3111
V
OUT
10uF
C
OUT
VOUT
GND
SHDN
C+
VIN
C-
C
IN
1uF
V
IN
10uF
ON/OFF
3111.2006.06.1.3
1