Tel :
Fax :
email :
+44 118 979 1238
+44 118 979 1283
info@actcrystals.com
ACT9200SSCL
The ACT9200SSCL is housed in a miniature, low profile SMD package, with a ceramic base utilising
a seam welded metal lid for high reliability and better long-term stability. Spread Spectrum
Technology is employed to assist with EMI emission reductions. This 7x5mm device is available
with CMOS output with a supply voltage of 3.3V This version offers a lower jitter than the standard
9200SSC version. Taped and reeled packaging (1K reels) and loose quantities are available for
purchase, to suit high and low volume production. Other Spread Spectrum devices available in
DIL14 and 9.6x11.4x2.5 on request.
SPECIFICATION
Parameter
Supply Voltage
Frequency Range
Frequency Stability
Temp Operating Range
Temp Storage Range
Operating Current
Spread Percentage
Down spread or
Symbol
VDD
fo
Δf/fo
Topr
Tstg
Iop
Total %
0.50
0.75
1.30
Specification
3.3V
DC
± 5%
13.000 ~220.0 MHz
±25ppm, ±50ppm or ±100ppm
0 ~ +70°C or -40 ~ +85°C
-65 to +150°C
25mA typical
Down Spread %
-0.5
-0.75
-1.25
-2
-2.5
-3
-3.5
-3.75
Centre Spread %
±0.25
±0.375
±0.625
±1.0
±1.25
±1.5**
±1.75
±1.875
Condition
Please specify
Please specify
Please specify
Freq Dependent
Centre spread need to be
specified when ordering.
Tolerance ±30% of Total%
2.00
2.50
3.00
3.50
3.80
** For initial trial
samples the centre
spread ±1.5% is
recommended
EMI Reduction
Modulation Carrier Frequency
Duty Cycle
Output Level ‘0’
Output Level ‘1’
Output Impedance
Rise & Fall Time (max)
Output Load
Start-up Time
Tri-state
Static discharge Voltage
Ageing
Cycle to Cycle Jitter
Fa
Tj
TrTf
N/CL
Tosc
Tw/t
VOL
VOH
Equals 10Log(Total%x Frequency (MHz))xHarmonic / 0.12
25.3 KHz min, 58.6KHz max
45/55%
0.4V max (at 20% VDD)
2.4V min (at 80% VDD)
40 ohms typical
1.2nS max (20%VDD to 80%VDD)
15pF CMOS
5mS max, 2mS Typ
Not Available
>2000V
±5ppm
±150pS max, ±100pS Typical
See examples
Frequency dependant
Pin 1 must be O/C
MIL STD 883 Method 3015
first year max @25°C
for 13 MHz Oscillator
**
** Refer to Page 3
APPLICATIONS
- Networking
- Embedded Systems
- GPS
- LCD Displays
- ADSL, PCMCIA
- Digital Imaging
- Instrumentation
Please note that all parameters can not necessarily be specified in the same device
Customer to Specify : Frequency, Frequency Stability, Operating Temperature Range, Centre or down Spread, Spread Percentage
In line with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice.
ISO9001: 2000 Registered
For quotations or further information please contact us at:
3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK
http://www.actcrystals.com
Issue:4 M6
Page 1 of 5
Date:26/10/05
ACT [ ADVANCED CRYSTAL TECHNOLOGY ]
