PC/104-Digital I/O Board
104-DIO-24E
104-DIO-48E
Features
• 48 or 24 Parallel Bits of Digital I/O, Type 82C55 PPI (Mode 0)
• Compatible with Opto-22 type Solid State Module Racks
• One or two 24 parallel bit groups (two 8 bit port) and two 4 bit
ports each group.
• All bits are buffered, 64mA sink, 32mA source
• I/O pulled up to 5V for Contact Monitoring, pulldowns are
available by request
• 5V available on pin 49 of each group (0.5A Resettable Fuse on
each)
• I/O connectors: Two Industry Standard 50 pin headers plus one
ten-pin header for the counter/timer
• Timer/Counter Type 82C54
Native Modes:
Pulse and square wave generator
Re-triggered one-shot
S/W or H/W triggered strobe
Rate generator
Description
The circuits use an 82C55A PPI with mode 0 supported. Ports A, B and C are buffered with 74ABT245 transceivers and pulled up to 5V
(standard).
The optional 82C54 has three-sixteen bit down-counters within one chip. These counters are useful for generating square waves, strobes,
and pulses (PWM). Also, the frequency of square waves and strobes or the width of pulses or the number of events can be measured.
Software is provided.
Low power circuits are used with an overall consumption as low as 0.25 Watts.
Software Package includes a setup program detailing all jumper settings, also IRQ drivers and samples for DOS and Windows (including
NT/2000 and NT/XP). A Linux Sample is also provided.
Ordering Information
Item code
104-DIO24E
104-DIO 48E
Part #
310240
310480
Description
PC/104-Analog I/O Board
PC/104-Analog I/O Board
ADL [ ADVANCED DIGITAL LOGIC, INC. ]
