PC/104 - USB I/O Modules
USB-IDIO-16 - Isolated Input and Solid State Relay Output Digital I/O Modules
FEATURES
•
High-speed USB 2.0 device, USB 1.1 compatible
•
16 individually optically isolated inputs (channel to channel and channel to
ground)
•
Polarity insensitive AC/DC inputs accept up to 31 VDC or AC RMS
•
Jumper selectable filtering per input channel for AC or voltage transients
•
16 optically isolated fully protected high-side FETs capable of switching up to 2A
•
Internal removable screw terminal board for easy wiring
•
All power drawn from USB port, no external power adapter required
•
USB/104 form-factor for OEM embedded applications
•
Small, (4” x 4” x 1.4”) rugged industrial enclosure
•
Custom high-speed function driver
•
PC/104 module size and mounting compatibility
•
Type B USB connector features industrial strength and high-retention design
FACTORY OPTIONS
•
Input only and solid state output only versions
•
Eight input/output version
•
External power for high current capabilities
•
Extended temperature and DIN rail mounting provisions
•
OEM version (board only) features PC/104 module size and mounting
compatibility
•
RoHS available. Please contact us for ordering information
FUNCTIONAL DESCRIPTION
The USB-IDIO-16 is an ideal solution for adding portable, easy-to-install isolated input and solid state output capabilities to any computer with a USB port. The
USB-IDIO-16 is a USB 2.0 high-speed device, offering the highest speed available with the USB bus. It is fully compatible with both USB 1.1 and USB 2.0
ports. The unit features hotplug functionality allowing for quick connect/disconnect whenever you need additional I/O on your USB port.
Featuring 16 high side power MOSFET switch outputs and 16 optically isolated digital inputs, the unit is the smallest of its kind for digital monitoring and control
using USB. The isolated, non-polarized inputs may be driven by either DC sources of 3-31V (or higher by special order) or AC sources at frequencies of 40Hz
to 10kHz. Individual channel-to-channel isolation allows every channel to be physically and electrically separated from the others. Optically isolating the digital
inputs from each other, and from the computer, assures smooth, error-free data transmission in noisy, real-world environments. The input channels are ac-
cessed via a 34-pin IDC type vertical header. The fully protected isolated outputs are de-energized at power-up to prevent an unintended control output signal.
Data to the solid state outputs are latched and are available via a 50-pin IDC type vertical header. The unit contains an internal, removable screw termination
board with onboard removable screw terminals to simplify wiring connections.
These boards are especially useful in applications where high common-mode external voltages are present. Isolation is required to guard electronics from
transient voltage spikes and offers greater common-mode noise rejection in electronically noisy surroundings containing industrial machinery and inductive
loads. These applications include factory automation, energy management, industrial ON/OFF control, security systems, manufacturing test, and process
monitoring. In addition to protecting industrial applications from accidental contact with high external voltages, the isolation provided eliminates troublesome
ground loops.
The USB-IDIO-16 was designed to be used in rugged industrial environments but is small enough to fit nicely onto any desk or testing station. The board is
PC/104 sized (3.550 by 3.775 inches) and ships with or without a steel powder-coated enclosure with an anti-skid bottom. A DIN rail mounting provision is
available for installation in industrial environments.
Advanced Digital Logic, Inc.; 4411 Morena Blvd., Suite 101; San Diego, CA 92117-4345
Ph. 858 490-0597 F. 858 490-0599; e-mail:
sales@adl-usa.com;
web:
www.adl-usa.com
ADL [ ADVANCED DIGITAL LOGIC, INC. ]
