HPC-7442
Features
4U Rackmount/Tower
Chassis for EATX/ATX
Motherboard with Up to
8 SAS/SATA HDD Trays
Supports EATX/ATX motherboard in short-depth 4U rackmount/tower chassis
Shock-resistant disk drive bay holds four mobile 3.5" and 2.5" SAS/SATA
disk trays, one slim optical disk drive, and one 3.5" internal drive
With installation of optional storage upgrade kit, eight mobile HDD trays
provide high storage capacity
Supports 80plus single and redundant power supply
Front-accessible system fan without opening top cover for easy maintenance
LED indicators and audible alarm notification for system fault detection
Smart fan speed control for system fans
Remote management (with new alarm board + SUSIAccess)
RoHS
COMPLIANT
2002/95/EC
Specifications
Drive Bay
Cooling
Front I/O Interface
Miscellaneous
Slim Optical Drive
2.5" or 3.5"*
Fan*
Air Filter
USB
LED Indicators
Rear Panel
Temperature
Humidity
Vibration (5 ~ 500 Hz)
Shock
Dimensions (W x H x D)
Weight
Front-accessible
Internal
1
-
4 SAS/SATA HDDs
1 (3.5")
1 (12 cm /114 CFM) + 1 (8 cm/55 CFM) for SAS/SATA storage unit
Yes
2
Power, HDD, temperature, fan, LAN1, and LAN2
Five 9-pin D-Sub and one 68-pin SCSI openings
Operating
Non-Operating
0 ~ 40° C (32 ~ 104° F)
-20 ~ 60° C (-4 ~ 140° F)
10 ~ 85% @ 40° C, non-condensing
10 ~ 95% @ 40° C, non-condensing
1 Grms
2G
10 G (with 11 ms duration, half sine wave)
30 G
482 x 177 x 600 mm (19" x 7.0" x 23.6")
18.5 kg (40.68 lb)
Environment
Physical Characteristics
* While adding the optional "storage upgrade kit", the chassis will support four more front-accessible SAS/SATA HDDs and one more (8cm/55CFM)fan for SAS/SATA storage unit.
Front View
USB x2
Slim optical
LED indicators
drive bay
Switch/buttons
Inside View
Case open switch
Internal 3.5" drive bay
Easy-to-maintain
storage fan kit with
thumb screw
2nd storage fan if
installing optional
"storage upgrade kit"
New alarm board
featuring system fan
speed control
Supports EATX/ATX
form factor motherboard
Front-accessible fan
without opening top cover
Mobile HDD tray x4
Reserved for "storage upgrade kit" to
support 4 more mobile HDD trays
Hold-down clamp
with rubber cushions
Upgrade Feature
+
HPC-7442 default sku
(supports 4 mobile HDD trays)
*Note: Motherboard and power supply are not included.
Storage upgrade kit
(optional)
=
HPC-7442 8-bay sku
(supports 8 mobile HDD trays)
Industrial Computer Chassis
All product specifications are subject to change without notice
Last updated : 28-Mar-2013
ADVANTECH [ Advantech Co., Ltd. ]
