MIC-3393
NEW
6U CompactPCI Intel
®
Xeon
®
Quad/
Dual Core Processor Blade
Features
Supports 45 nm Intel
®
Xeon
®
Low Voltage/Ultra Low Voltage processor
Intel
®
5100MCH chipset supports 1066/1333 MHz FSB
Up to 4 GB (DDR2 533/667) ECC memory
Optimized design in one or two slots SBC with USB Flash Drive, and 2.5"
SATA HDD/CompactFlash socket
Optional Extension Module on 8HP version supports two XMCs, PMCs or
2.5" SATA HDDs
TPM, three GbE ports, six SATA ports, four USB 2.0 ports, one VGA port, three
RS-232 ports, one PS/2 connector, and PCIe x1, PCIe x4 interfaces to the Rear
Transition Module (RTM)
Built-in Intel
®
I/OAT technology for enhanced I/O performance
PICMG 2.16 R1.0, PICMG 2.9 R1.0, PICMG 2.1 R2.0 compliant
RoHS
COMPLIANT
Introduction
2002/95/EC
Experience true server class performance on CompactPCI. Using Intel 45nm 64-bit Xeon technology with up to four cores at 2.33 GHz combined with the powerful San Clemente chipset,
the MIC-3393 blade boosts computing and I/O performance deploying the latest virtualization, multi-threading and I/OAT acceleration techniques. Enhanced Xeon
®
packaging, front
side bus parity, onboard, soldered DRAM with ECC support and RASUM features integrated in the 5100 MCH combined with PICMG2.9, IPMI-based management make the MIC-3393
a highly available and reliable high performance computing engine. The comprehensive I/O subsystem includes an onboard USB flash disk, a 2.5" SATA HDD or CompactFlash slot,
three advanced Gigabit Ethernet controllers, two UARTs, USB ports and a TPM. The addition of PCIe links to the RTM further enhances versatility compared to previous generation
blades resulting in best-in-class connectivity.
The RIO-3311 RTM module supports one PS/2 connector with both keyboard and mouse ports, three USB ports, two RS-232 ports, 2 SATA ports, a PCIe based server graphics
controller with VGA port, a USB port for USB NAND flash module, and alternate cabling for the three Gigabit Ethernet ports of the MIC-3393. In case the SATA disk drives and SATA
RAID support of the ICH9R do not meet performance and reliability requirements, the RIO-3311 SAS version supports a 4-port SAS controller with RAID and failover support.
The MIC-3393 is outfitted with single slot (4HP) or dual slot (8HP) front panels to match CPU performance, CPU power dissipation, and system cooling capabilities. The 8HP version
of the blade can be extended with a MIC-3312 mezzanine module which can carry two XMCs/PMCs or two 2.5" SATA HDDs to support enhanced I/O modularity and additional mass
storage options.
Specifications
Processor System
CPU
Chipset
Front Side Bus
BIOS
Technology
Max. Capacity
Socket
J1~J2 Connectors
J3 Connector
J5 Connector
Bridge
Mode
Controller
Interface
I/O Connector
Controller
Interface
I/O Connector
Controller
Resolution
Type
Channels
Type
Channels
Quad-Core/Dual-Core Intel
®
Xeon
®
processor LV or Dual-Core Intel
®
Xeon
®
processor ULV up to 2.66 GHz
Intel
®
5100MCH/ICH9R (San Clemente)
1066/1333 MHz with parity protection
Redundant AMI 2MByte SPI flash
Dual channel DDR2 533/667 MHz with ECC
2 GB onboard, max. 4 GB total
SORDIMM x2
64-bit/66 MHz PCI local bus + RTM
PICMG2.16 + RTM
RTM
Pericom PI7C9X130DNDE + PLX PCI 6540CB
Sytem Master/Drone (Stand alone)
2 Intel
®
82574L single-port Gigabit Ethernet controllers
10/100/1000Base-TX Ethernet
PICMG2.16 x 1, RJ-45 x1 or RTM x 2
Intel
®
ICH9R MAC and Intel
®
82566DM Gigabit Ethernet PHY
10/100/1000Base-TX Ethernet
RJ-45 x 1 or RTM x 1
XGI Volari Z11 PCIe Server graphics with 32 MB VRAM
Up to 1600 x 1200, 64k hi-color at 70Hz
SATA-II
1 channel. to onboard SATA HDD carrier or CF disk carrier
2 channels. to RTM
2 channels to extension module (8HP only)
USB
1 to onboard 1 GB flash disk
Memory
CompactPCI Interface
Ethernet
Graphics (on RTM)
Storage
All product specifications are subject to change without notice
Last updated : 27-Oct-2009
ADVANTECH [ Advantech Co., Ltd. ]
