MIC-5603
NEW
Advanced Mezzanine Card based on 3rd Generation
Intel
®
Core™ Processors with ECC
Features
Supports 3rd or 2nd Generation Intel
®
Core™ Processor family
Intel
®
QM67 PCH chipset with KVM over LAN
Up to 8 GB (DDR3 1066/1333/1600 MHz) soldered SDRAM with ECC
Two Gigabit Ethernet (RJ-45), one USB 2.0 (or two for full-size sku), one
console (micro-USB), and one HDMI Type D ( or Type A for full-size sku) to
front panel
AMC connector routes Gigabit Ethernet (x2), SATA 3.0 (x2), PCIe x4
Dual XAUI, SRIO, PCIe or custom fabrics on fat pipes with optional AMC fabric
mezzanine
Boot from network, onboard flash, CFast card or external devices
Supports IPMI v1.5 and Serial-over-LAN function
AMC.0, AMC.1, AMC.2, and AMC.3 compliant
RoHS
COMPLIANT
2002/95/EC
Introduction
The Advantech MIC-5603 is a single-width mid-size or full-size general purpose processor AMC module for ATCA or MicroTCA applications. Its design is based on 3rd generation
Intel
®
Core™ processors in a BGA package combined with the Intel
®
QM67 chipset. This AMC module supports processors with integrated memory and graphics controllers, and a
maximum L3 cache of 4MB. It can support up to 8 GB, dual-channel, on-board DDR3 memory with ECC at 1600 MHz, making it ideal for mission critical applications requiring low
latency and reliable memory access. For graphics or control applications the front panel HDMI port provides support for the processor’s integrated Intel
®
HD 4000 graphics controller
with DirectX v11, along with OpenGL v3.1 and OpenCL v1.1 capabilities.
As standard feature, external Ethernet connectivity is provided on two dedicated GbE front panel ports, one each from the Intel
®
QM67 PCH and the onboard Intel
®
82580 quad port
LAN controller, which also provides two additional GbE ports to the AMC base fabric. The Intel
®
PCH brings new and enhanced remote management capabilities with KVM over LAN
as well as introducing faster I/O than previous generation designs with SATA-III to AMC ports 2..3 and PCIe x4 gen.2 to ports 4..7. This module can also be configured to boot from
the network, local CFast compact flash or flash disk, or external storage media such as HDD or USB drives.
To enable maximum application flexibility, the MIC-5603 is not only designed to support PICMG AMC sub-specifications such as AMC.1/.2/.3, it also has a fabric expansion mezzanine
interface that allows the implementation of standard or customized mezzanine modules that offer enhanced fat pipe connectivity and I/O support. For example, the fabric expansion
mezzanine can implement an Intel
®
82599 controller offering dual 10 GbE to the fat pipes or a PCIe-to-SRIO bridge or any other type of PCIe device for tailored connectivity to ports
8..11 and 17..20. A dedicated Module Management Controller (MMC) monitors onboard conditions and manages hot swap operation, module replacement and field upgrades without
the need to power down the carrier system.
Specifications
Processor System
Bus
Memory
Ethernet
Front I/O Interface
Mass Storage
SATA
Interfaces
Operating System
System Management
Watchdog Timer
Miscellaneous
Compliance
CPU
Max. Speed
PCH
BIOS
DMI
Technology
Max. Capacity
Controllers
Interface
Serial (COM)
Ethernet
USB 2.0
CFast
Onboard
AMC edge connector
Other
Compatibility
MMC
IPMI Compliancy
Supervision
Interval
LEDs
Standards
Intel 3rd Generation Core i7 mobile processors up to 2.5 GHz (4 MB L3 cache)
3.2 GHz (turbo boost frequency with 1 core)
Intel QM67
UEFI BIOS based on AMI
(1. Redundant flash with HPM.1 update & rollback, 2. Configuration settings can be changed over IPMI)
5.0 GT/s point-to-point DMI interface to PCH
Dual channel DDR3 1066MT/s, 1333MT/s, and 1600MT/s SDRAM with ECC.
8 GB RAM (soldered on-board memory)
Intel 82580EB Quad-port Gigabit Ethernet controller
Two GbE accessible on front panel via RJ-45 and two SerDes links to AMC ports 0 and 1
One x86 Serial Port
(USB slave connector through onboard USB to Serial converter)
Two 10/100/1000BASE-T through PCIe based Intel 82580 & 82579 MAC/PHY
One port (Type A)
Mezzanine Module with CFast socket (NOTE 1)
8 GB (standard) or 16 GB (optional) industrial grade internal SATA flash disk
Two SATA interfaces (6Gbps) to common option ports 2..3
One SATA routed to CF daughter board (optional)
WindRiver PNE-LE 3.0, RHEL, CentOS, Windows Server 2008, Windows 7 Enterprise
NXP LPC1768
IPMI 1.5 with IPMI 2.0 features (e.g. RMCP, SOL) using Advantech IPMI Core
One MMC watchdog, One payload watchdog
IPMI compliant
x1 blue for hot swap, x1 red/amber for failure and OOS, x1 green for general purpose
PICMG AMC.0, AMC.1, AMC.2, AMC.3, IPMI v1.5, HPM.1
All product specifications are subject to change without notice
Last updated : 18-Jun-2012
ADVANTECH [ Advantech Co., Ltd. ]
