CT2512 / CT2513 / CT2510 / CT2511
Dual Redundant Remote Terminal
FOR MIL-STD-1553B
Features
• CT2512 Replaces DDC BUS-65112 and BUS-65117
• CT2513 Replaces DDC BUS-65113 and BUS-65118
• CT2510 Replaces DDC BUS-65110 and BUS-65120
• CT2511 Replaces DDC BUS-65111 and BUS-65121
• Functions as a Complete Remote Terminal Unit
• Supports 13 Mode Codes, Illegalization of Codes Allowed
• Transfers Data with DMA Type Handshaking
• Latched Outputs for Command Word and Word Count
• 14 Bit Built-ln-Test Word Register
• 4 Error Flag Outputs
• Advanced Low Power VLSI Technology
• Approved DESC SMD# 5962–87535
www.aeroflex.com/act1.htm
CIRCUIT TECHNOLOGY
A E
RO
F
LE
X
LA
C
ISO
9001
E
RT
I
F
I
E
D
B
S
I
NC
.
General Description
The CT2512 contains 2 transceivers, 2 encoder/decoders, bit processors and complete Remote Terminal (RT)
logic. The device is constructed using Aeroflex advanced VLSI custom chip and hybrid technology. It
functions as a complete dual redundant MIL-STD-1553B RT Unit supporting all 13 mode codes for dual
redundant operation. The CT2512 is a pin-for-pin functional equivalent of the DDC BUS-65112/117 and
performs parallel data transfers with a DMA type handshake. Multiple error flag outputs and host access to
many of the RT Status Word bits are just some of the features that make this part ideal for many RT
applications. The unit has an operating range of -55°C to + 125°C. Aeroflex is a MIL-PRF-38534 Certified
Manufacturer.
See "Ordering Information" (last sheet) for CT2513 / CT2510 / CT2511.
DATA BUS A
DUAL
TRANSCEIVER
DATA BUS B
ENCODER/
DECODER
MIL-STD-1553B
PROTOCOL
AND
BIT
I/O
INTERFACE
DB0-DB15
A0-A11
ERROR FLAG
TIMING FLAGS
STATUS BITS
ENCODER/
DECODER
PROCESSING
LOGIC
Figure 1 – Functional Block Diagram
eroflex Circuit T
echnology
– Data Bus Modules For The Future © SCDCT2512 REV C 8/14/01