AA51882
Agamem Microelectronics Inc.
SERVO MOTOR CONTROLLER
PRELIMINARY
■ PIN DESCRIPTION
PIN NO.
PIN NAME
FUNCTION
Constant output voltage of 2.5V (typical). Make
connections from this pin to a potentiometer or
pulse stretcher resistor.
1
VREG
Connect the capacitor and resistor of the pulse
stretcher section.
2
3
CST
CDB
Dead band setting by connecting a capacitor.
Input signal, an adjustable pulse of 20ms cycle and
1.0-2.0ms pulse-width, operate with a positive
pulse of peak value 3V or greater.
4
5
VIN
RT
Timing Resistor, connect a resistor that will
determine the value of the constant current of this
pin. A resistor of 18kΩ will yield a current of
1.0mA.
Local pulse setting, connect a capacitor that will
generate a triangular wave by constant current
charging.
6
7
CT
MOT1
Output Driver 1 (connect to motor)
2
©Copyright Agamem Microelectronics Inc.
www.agamem.com.tw
2008/5/5
AGAMEM MICROELECTRONICS INCOPERATION RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE
TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. AGAMEM DOES NOT ASSUME ANY
LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCTS OR CIRCUIT DESRIBED HEREIN; NEITHER
DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.