Agamem Mircoelectronics Inc.
AA88368AP
10-BIT DAC
PRELIMINARY
FEATURES
14 bits serial data input (3 wire serial data transfer method, DI, CLK, LD)
R-2R resistor ladder used for D/A conversion
10 channels with 10 bits resolution monotonic D/A converter
10channel buffer operational amplifiers operating in the full voltage range
from VCC to GND
Max. +/- 3.5 LSBs Integral Non-Linearity
Max +/- 1 LSB Differential Non-Linearity
Max. 10 MHz Serial data input
Serial I/O for cascade application
Max. 2.0 mA analog output drive/sink current
Two separate power supply/ground lines for system and analog power
supply
Single +5 V system power supply
Silicon-gate CMOS process
DESCRIPTION
The AA88368AP is an 10-bit resolution digital to analog converter (DAC),
designed for interface with 10 bits micro-controller. The AA88368AP has 10 channels
with operational amplifier output buffers. Digital data are input serially in max.
10MHz by individual channel units. The latched digital data are converted into analog
DC voltages by the D/A converter in 20μs settling time. AA88368AP is a single 5V
power DAC. Output could be full swing as the analog power is equal to the system
power.
The AA88368AP has 10 operational amplifier output buffers for each one of 10
channels. These operational amplifier output buffers are used to provide high current
drive/sink capability. The AA88368AP is suitable for electronic volumes and
replacement for potentiometers for adjustment, in addition to normal D/A converter
applications.
AA88368AP is a 20 pins SSOP package. Its operation temperature range is
specified over -10℃ to 75℃. Figure 2 shows its pin assignment.
1
2006/7/5