欢迎访问ic37.com |
会员登录 免费注册
发布采购

BRF1A16P 参数 Datasheet PDF下载

BRF1A16P图片预览
型号: BRF1A16P
PDF下载: 下载PDF文件 查看货源
内容描述: 四路差分接收器BRF1A , BRF2A , BRS2B , BRR1A和BRT1A [Quad Differential Receivers BRF1A, BRF2A, BRS2B, BRR1A, and BRT1A]
分类和应用: 接口集成电路光电二极管信息通信管理
文件页数/大小: 12 页 / 222 K
品牌: AGERE [ AGERE SYSTEMS ]
 浏览型号BRF1A16P的Datasheet PDF文件第2页浏览型号BRF1A16P的Datasheet PDF文件第3页浏览型号BRF1A16P的Datasheet PDF文件第4页浏览型号BRF1A16P的Datasheet PDF文件第5页浏览型号BRF1A16P的Datasheet PDF文件第6页浏览型号BRF1A16P的Datasheet PDF文件第7页浏览型号BRF1A16P的Datasheet PDF文件第8页浏览型号BRF1A16P的Datasheet PDF文件第9页  
Data Sheet
April 2001
Quad Differential Receivers
BRF1A, BRF2A, BRS2B, BRR1A, and BRT1A
Features
s
Pin equivalent to the general-trade 26LS32 device,
with improved speed, reduced power consumption,
and significantly lower levels of EMI
High input impedance approximately 8 kΩ
Four line receivers per package
400 Mbits/s maximum data rate when used with
Agere Systems Inc. data transmission drivers
Meets enhanced small device interface (ESDI)
standards
4.0 ns maximum propagation delay
<0.20 V input sensitivity
−1.2
V to
+7.2
V common-mode range
−40 °C
to
+125 °C
ambient operating temperature
range (wider than the 41 Series)
Single 5.0 V
±
10% supply
Output defaults to logic 1 when inputs are left
open*
Available in four package types
Lower power requirement than the 41 Series
The BRF1A device is the generic receiver in this
family and requires the user to supply external
resistors on the circuit board for impedance
matching.
The BRF2A is identical to the BRF1A, but has an
electrostatic discharge (ESD) protection circuit
added to significantly improve the ESD human-body
model (HBM) characteristics on the differential input
terminals.
The BRS2B is identical to the BRF2A, but has a
preferred state feature that places the output in the
high state when the inputs are open, shorted to
ground, or shorted to the power supply.
The BRR1A is equivalent to the BRF1A, but has a
110
resistor connected across the differential
inputs. This eliminates the need for an external
resistor when terminating a 100
impedance line.
This device is designed to work with the DP1A or
PNPA in point-to-point applications.
The BRT1A is equivalent to the BRF1A; however, it
is provided with a Y-type resistor network across the
differential inputs and terminated to ground. The
Y-type termination provides the best EMI results.
This device is not recommended for applications
where the differences in ground voltage between the
driver and the receiver exceed 1 V. This device is
designed to work with the DG1A or PNGA in point-to-
point applications.
The powerdown loading characteristics of the
receiver input circuit are approximately 8 kΩ relative
to the power supplies; hence, they will not load the
transmission line when the circuit is powered down.
For those circuits with termination resistors, the line
will remain impedance matched when the circuit is
powered down.
The packaging options that are available for these
quad differential line drivers include a 16-pin DIP; a
16-pin, J-lead SOJ; a 16-pin, gull-wing small-outline
integrated circuit (SOIC); and a 16-pin, narrow-body,
gull-wing SOIC.
s
s
s
s
s
s
s
s
s
s
s
s
Description
These quad differential receivers accept digital data
over balanced transmission lines. They translate
differential input logic levels to TTL output logic
levels. All devices in this family have four receivers
with a common enable control. These receivers are
pin equivalent to the general-trade 26LS32, but offer
increased speed and decreased power consumption.
They replace the Agere 41 Series receivers.
* This feature is available on BRF1A and BRF2A.