Agilent HCPL-0708
High Speed
CMOS Optocoupler
Data Sheet
Features
• +5 V CMOS compatibility
• 15 ns typical pulse width distortion
Description
Available in SO-8 package, the
HCPL-0708 optocoupler utilizes the
latest CMOS IC technology to
achieve outstanding performance
with very low power consumption.
Basic building blocks of the HCPL-
• 30 ns max. pulse width distortion
• 40 ns max. propagation delay
skew
• High speed: 15 MBd
• 60 ns max. propagation delay
• 10 kV/µs minimum common mode
rejection
• –40 to 100°C temperature range
• Safety and regulatory approvals
pending
– UL recognized
2500 V rms for 1 min. per
UL 1577 for HCPL-0708
– CSA component acceptance
Notice #5
– VDE 0884 (TUV) approved for
HCPL-0708 Option 060
Applications
• Scan drive in PDP
• Digital field bus isolation:
DeviceNet, SDS, Profibus
• Multiplexed data transmission
• Computer peripheral interface
• Microprocessor system interface
• DC/DC converter
0708 are a high speed LED and a
CMOS detector IC. The detector
incorporates an integrated
photodiode, a high-speed trans-
impedance amplifier, and a voltage
comparator with an output driver.
Functional Diagram
NC
1
8
V
DD
ANODE
2
7
NC
CATHODE
3
6
V
O
NC
4
5
GND
TRUTH TABLE
LED
OFF
ON
V
O
, OUTPUT
H
L
*A 0.1
µF
bypass capacitor
must be connected between
pins 5 and 8.
CAUTION:
It is advised that normal static precautions be taken in handling and assembly of this
component to prevent damage and/or degradation which may be induced by ESD.
AGILENT [ AGILENT TECHNOLOGIES, LTD. ]
