HDSP-5503 参数 Datasheet PDF下载

7

High Performance Green

Device

Series

HDSP-

Parameter

Luminous

(Digit Average)`

Intensity/Segment

[1,2]

Symbol

I

V

Min.

900

Typ.

2500

Max.

Units

µcd

Test Conditions

I

F

= 10 mA

I

F

= 60 mA Peak:

1 of 6 df

3100

V

F

λ

PEAK

λ

d

V

R

∆V

F

/°C

Rθ

J-Pin

3.0

2.1

566

571

50

-2

345

577

2.5

V

nm

nm

V

mV/°C

°C/W/

Seg

Forward Voltage/Segment or DP

56XX

Peak Wavelength

Dominant Wavelength

[3,7]

Reverse Voltage/Segment or DP

[4]

Temperature Coefficient of

V

F

/Segment or DP

Thermal Resistance LED Junction-

to-Pin

I

F

= 10 mA

I

R

= 100

µA

Notes:

1. Device case temperature is 25°C prior to the intensity measurement.

2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.

3. The dominant wavelength,

λ

d

, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of

the device.

4. Typical specification for reference only. Do not exceed absolute maximum ratings.

5. For low current operation, the AlGaAs HDSP-H10X series displays are recommended. They are tested at 1 mA dc/segment and are

pin for pin compatible with the HDSP-H15X series.

6. For low current operation, the HER HDSP-555X series displays are recommended. They are tested at 2 mA dc/segment and are pin

for pin compatible with the HDSP-550X series.

7. The Yellow (HDSP-5700) and Green (HDSP-5600) displays are categorized for dominant wavelength. The category is designated by

a number adjacent to the luminous intensity category letter.

AlGaAs Red

Figure 1. Maximum Tolerable Peak Current vs.

Pulse Duration – Red.

Figure 2. Maximum Tolerable Peak Current

vs. Pulse Duration – AlGaAs Red.