Regulatory Compliance Table
Feature
Test Method
Performance
Electrostatic Discharge
(ESD) to the Electrical Pins
Electrostatic Discharge
MIL-STD-883C
Method 3015.4
Variation of
Meets Class 2 (2000 to 3999 Volts).
Withstand up to 2200 V applied between electrical pins.
Typically withstand at least 25 kV without damage when the MT-RJ
ESD) to the MT-RJ Receptacle
Electromagnetic
IEC 801-2
FCC Class B
Connector Receptacle is contacted by a Human Body Model probe.
Transceivers typically provide a 10 dB margin to the noted standard limits
Interference (EMI)
CENELEC CEN55022
when tested at a certified test range with the transceiver mounted to a
VCCI Class 2
circuit card without a chassis enclosure.
Immunity
Variation of IEC 801-3
Typically show no measurable effect from a 10 V/m field swept from 10 to
450 MHz applied to the transceiver when mounted to a circuit card without a
chassis enclosure.
Eye Safety
IEC 825 Issue 1 1993:11
Class 1
Compliant per Agilent testing under single fault conditions.
TUV Certification: LED Class 1
CENELEC EN60825 Class 1
Electromagnetic Interference (EMI)
Immunity
For additional information
Most equipment designs utilizing Equipment utilizing these
regarding EMI, susceptibility,
this high speed transceiver from
Agilent will be required to meet
the requirements of FCC in the
United States, CENELEC
EN55022 (CISPR 22) in Europe
and VCCI in Japan.
transceivers will be subject to
radio-frequency electromagnetic procedures and results on the 1 x
fields in some environments.
These transceivers have a high
immunity to such fields.
ESD and conducted noise testing
9 Transceiver family, please
refer to Applications Note 1075,
Testing and Measuring Electro-
magnetic Compatibility
Performance of the HFBR-510X/
-520X Fiber Optic Transceivers.
Transceiver Reliability and
Performance Qualification Data
The 2 x 5 transceivers have
passed Agilent reliability and
performance qualification
testing and are undergoing
ongoing quality and reliability
monitoring. Details are available
from your Agilent sales
3.8
(0.15 )
10.8 0.1
(0.425 0.004)
1
(0.039
)
9.8 0.1
(0.386 0.004)
representative.
These transceivers are
manufactured at the Agilent
Singapore location which is an
ISO 9002 certified facility.
0.25 0.1
(0.01 0.004)
(TOP OF PCB TO
14.79
(0.589
13.97
(0.55)
MIN.
Applications Support Materials
Contact your local Agilent
Component Field Sales Office for
information on how to obtain
PCB layouts and evaluation
boards for the 2 x 5 transceivers.
)
BOTTOM OF
OPENING)
DIMENSIONS IN MILLIMETERS (INCHES)
Figure 10. Recommended Panel Mounting
9
AGILENT [ AGILENT TECHNOLOGIES, LTD. ]
