欢迎访问ic37.com |
会员登录 免费注册
发布采购

HSSR-8060 参数 Datasheet PDF下载

HSSR-8060图片预览
型号: HSSR-8060
PDF下载: 下载PDF文件 查看货源
内容描述: 60 V / 0.7欧姆,通用,1个A型,固态继电器 [60 V/0.7 Ohm, General Purpose, 1 Form A, Solid State Relay]
分类和应用: 光电继电器固态继电器
文件页数/大小: 12 页 / 252 K
品牌: AGILENT [ AGILENT TECHNOLOGIES, LTD. ]
 浏览型号HSSR-8060的Datasheet PDF文件第2页浏览型号HSSR-8060的Datasheet PDF文件第3页浏览型号HSSR-8060的Datasheet PDF文件第4页浏览型号HSSR-8060的Datasheet PDF文件第5页浏览型号HSSR-8060的Datasheet PDF文件第6页浏览型号HSSR-8060的Datasheet PDF文件第7页浏览型号HSSR-8060的Datasheet PDF文件第8页浏览型号HSSR-8060的Datasheet PDF文件第9页  
60 V/0.7 Ohm,
General Purpose, 1 Form A,
Solid State Relay
Technical Data
HSSR-8060
Features
• Compact Solid-State
Bidirectional Switch
• Normally-Off Single-Pole
Relay Function (1 Form A)
• 60 V Output Withstand
Voltage in Both Polarities at
25
°
C
• 0.75/1.5 Amp Current
Ratings (See Schematic for
Connections A & B)
• Low Input Current; CMOS
Compatibility
• Very Low On-resistance:
0.4
Typical at 25
°
C
• ac/dc Signal and Power
Switching
• Input-to-Output Momentary
Withstand Insulation
Voltage: 2500 Vac, 1 Minute
• 16-kV ESD Immunity: MIL-
STD-883, Method 3015
• IEEE Surge Withstand
Capability (IEEE STD
472-1974)
• CSA Approved
• UL 508 Approved
• Telecommunication
Switching Equipment
• Reed Relay Replacement
• 28 Vdc, 24 Vac, 48 Vdc Load
Driver
• Industrial Relay Coil Driver
Description
The HSSR-8060 consists of a
high-voltage circuit, optically
coupled with a light emitting
diode (LED). This device is a
solid-state replacement for single-
pole, normally-open (1 Form A)
electromechanical relays used for
general purpose switching of
signals and low-power loads. The
relay turns on (contact closes)
with a minimum input current, I
F
,
of 5 mA through the input LED.
The relay turns off (contact
opens) with an input voltage, V
F
,
of 0.8 V or less. The detector
contains a high speed photosensi-
tive FET driver circuit and two
high voltage MOSFETs.
This relay’s logic level input con-
trol and very low typical output
on-resistance of 0.4
makes it
suitable for both ac and dc loads.
Connection A, as shown in the
schematic, allows the relay to
switch either ac or dc loads.
Connection B, with the polarity
and pin configuration as indicated
in the schematic, allows the relay
to switch dc loads only. The
advantage of Connection B is that
the on-resistance is significantly
reduced, and the output current
capability increases by a factor of
two.
The electrical and switching char-
acteristics of the HSSR-8060 are
specified from -40°C to +85°C.
Functional Diagram
Applications
• Programmable Logic
Controllers
TRUTH TABLE
(POSITIVE LOGIC)
LED
OUTPUT
ON
L
OFF
H
CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to
prevent damage and/or degradation which may be induced by ESD.