AIC1526
Dual USB High-Side Power Switch
FEATURES
•
110mΩ (5V Input) High-Side MOSFET Switch.
500mA Continuous Load Current per Channel.
110µA Typical On-State Supply Current.
1µA Typical Off-State Supply Current.
Current-Limit / Short Circuit Protection.
Thermal Shutdown Protection under Overcurrent
Condition.
Undervoltage Lockout Ensures that Switch is off at
Start Up.
Output can be Forced Higher than Input (Off-
State).
Open-Drain Fault Flag.
Slow Turn ON and Fast Turn OFF.
Enable Active-High or Active-Low.
DESCRIPTION
The AIC1526 is a dual high-side power switch
for self-powered and bus-powered Universal
Serial Bus (USB) applications. One high-side
switch is a MOSFET with 110mΩ R
DS(ON)
, which
meets USB voltage drop requirements for
maximum transmission wire length.
Multi-purpose
indicates
open-drain
fault
flag
output
thermal
over-current
limiting,
shutdown, or undervoltage lockout for each
channel. Output current is typically limited to 1A,
well below the 5A safety requirement, and the
thermal
controls
condition.
Guaranteed minimum output rise time limits
inrush current during hot plug-in, minimizing
EMI and preventing the voltage at upstream port
from dropping excessively.
shutdown
each
function
independently
overcurrent
channel
under
APPLICATIONS
USB Power Management.
Hot Plug-In Power Supplies.
Battery-Charger Circuit.
Analog Integrations Corporation
DS-1526-00
4F, 9, Industry E. 9th Rd, Science Based Industrial Park, Hsinchu Taiwan, ROC
TEL: 886-3-5772500
FAX: 886-3-5772510
www.analog.com.tw
1