AM10E-C Series
10 watt dc-dc converters
•
•
•
POWER MODULES FOR PCB MOUNTING
2:1 WIDE INPUT RANGE
REGULATED OUTPUT
•
•
LOW RIPPLE & NOISE
REMOTE ON/OFF CONTROL ( OPTIONAL)
DC-DC CONVERTERS
GENERAL DESCRIPTION
Our AM10E-C series is a family of cost effective 10W sin-
gle output DC-DC converters. These converters are shield-
ed on all six sides and encapsulated with a nickel-coated
copper with a non-conductive base and dimensions of
50.8x25.4x10.5mm. The high performance features of our
AM10E-C components include short circuit protection
with current limit auto recovery, tight line regulation and
a high efficiency operation coefficient up to 83%.
Fifteen models operate from an input voltage range of 12,
24 & 48VDC producing output voltages of 3,3, 5, 12, 15
& 24VDC. The normal operation is specified over the
full operating temperature range of -25°C to +71°C with
no derating required. Cooling is done by free air convec-
tion.
ELECTRICAL SPECIFICATIONS
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Input Specifications:
Voltage range
Output Specifications:
Voltage accuracy
Ripple
Noise
Short circuit protection
Over current protection
Filter
Isolation Specifications:
Rated voltage
Resistance
Capacitance
General Specifications:
Efficiency
Switching frequency
12VDC, 9~18VDC
24VDC, 18~36VDC
48 VDC, 36~75VDC
p
(Pi) Network
1500VDC
>1000 Mohms
1000pF
78% to 83%
300KHz, typ. 100% load
±2%, max.
<0.2% Vout +20mVmax (Vp-p)
<0.5% Vout +50mVmax (Vp-p)
Current limit, auto-recovery
Works over 120% of rating
and recovers automatically
Over voltage protection Zener diode clamp protection
Line regulation (HL-LL) ±0.5%, typ.
Load regulation (10-100%)±1%, typ.
Temperature coefficient ±0.02%/°C, typ.
Physical Specifications:
Dimensions
50.8x25.4x10.5mm,
2.0x1.0x0.413inches
Weight
32g
Case material
Nickel-Coated Copper with
Non-Conductive base,
six sides’ shielded
Environmental Specifications:
Operating temperature
-25°C …+71°C
Storage temperature
-55°C …+105°C
Case temperature
+95°C, max.
Humidity (non-condensing)
Up to 95%
Cooling
Free-air convection
Specifications are subject to change without notification
MTBF: > 800,000 hrs (MIL-HDBK-217F, Ground Benign, t=+25ºC)
74
Continued on next page
TO ORDER CALL 1-888-9-AIMTEC
AIMTEC [ AIMTEC ]
