AM10E Series
Picture
Available
Soon
10 watt dc-dc converters
•
•
•
•
FULL SMD TECHNOLOGY
WIDE 2:1 INPUT RANGE
HIGH EFFICIENCY UP TO 90%
LOW PROFILE METAL PACKAGE
•
•
•
•
INPUT/OUTPUT ISOLATION: 1500VDC
OPERATING TEMPERATURE: -40°C ... +85°C
CONTINUOUS SHORT CIRCUIT PROTECTION
PIN-COMPATIBLE WITH MULTIPLE MANUFACTURERS
DC-DC CONVERTERS
GENERAL DESCRIPTION
Our AM10E series is a family of cost effective 10W
single and dual output DC/DC converters. These conver-
ters combine nickel-coated copper package with high
performance features such as 1500VDC input/output iso-
lation voltage, continuous short circuit protection with
automatic restart and tight line / load regulation. Wide
range devices operate over 2:1 input voltage range pro-
viding stable output voltage. Input voltages of 12, 24 and
48VDC with output voltages of 3.3, 5, 7.2, 9, 12, 15, 18,
24, ±3.3, ±5, ±7.2, ±9, ±12, ±15, ±18 or ±24VDC. High
performance features include high efficiency operation
up to 90% and output voltage accuracy of ±1% maxi-
mum. All models are packaged in a low profile 50.8 x
25.4 x 10.16mm nickel-coated copper case. Operation is
specified over the full operating temperature range of -
40°C to +85°C with no derating required. Cooling is by
free-air convection.
ELECTRICAL SPECIFICATIONS
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Input Specifications:
Voltage range
12VDC, 9~18VDC
24VDC, 18~36VDC
48VDC, 36~72VDC
Capacitor
General Specifications:
Efficiency
Switching frequency
Output Specifications:
Voltage accuracy
Voltage balance (Dual Output)
Ripple and noise
(at 20MHz BW)
Short circuit protection
Short circuit restart
Line voltage regulation
Load voltage regulation
Temperature coefficient
Over load protection
Physical Specifications:
Dimensions
Weight
Case material
83% to 90%
200KHz, typ. 100% load
±1%, max.
±1%
±100mVp-p, max.
Continuous
Automatic
±0.5%, max.
±0.5%, max.
±0.02%/°C, typ.
130%, typ. 100% load
50.8x25.4x10.16mm
2.00x1.00x0.40inches
46g
Nickel-Coated Copper
Filter
Isolation Specifications:
Rated voltage (60 sec)
Resistance
Capacitance
1500VDC
> 1000MOhm
500pF, typ.
Environmental Specifications:
Operating temperature
(ambient)
-40°C ... +85°C
Storage temperature
-40°C ... +125°C
Case Temperature
+100°C, max.
Derating
None required
Humidity (non-condensing)
Up to 90%
Cooling
Free-air Convection
MTBF: > 800,000 hrs @ 25°C (MIL-HDBK-217F)
Specifications are subject to change without notification.
Continued on next page
TO ORDER CALL 1-888-9-AIMTEC