AM8TW-C Series
8 watt dc-dc converters
•
•
•
•
24PIN DIP PACKAGE
PLASTIC ENCAPSULATED CASE
POWER MODULES FOR PCB MOUNTING
4:1 WIDE INPUT RANGE
•
•
•
REGULATED OUTPUT
LOW RIPPLE & NOISE
OPERATING TEMPERATURE : -25 … +71°C
DC-DC CONVERTERS
GENERAL DESCRIPTION
Our AM8TW-C series is a family of cost effective 8W
single and dual output DC-DC converters. These convert-
ers are shielded on all six sides and aluminum encapsu-
lated, have a non-conductive base and retain an anodized
black DIP24 compatible plastic case and dimensions of
31.8x20.3x10.2mm. The high performance features of
our AM8TW-C components include short circuit protec-
tion with current limit auto recovery, tight line regulation
and a high efficiency operation coefficient up to 82%.
These wide range devices operate over 4:1 input voltage
range, providing a continuously stable output voltage.
Sixteen models operate from an input voltage range of 24
& 48VDC producing output voltages of 3,3, 5, 12, 15, 24,
±5, ±12 & ±15VDC. The normal operation is specified
over the full operating temperature range of -25°C to
+71°C with no derating required. Cooling is done by free
air convection.
ELECTRICAL SPECIFICATIONS
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Input Specifications:
Voltage range
Filter
Isolation Specifications:
Rated voltage
Resistance
Capacitance
General Specifications:
Efficiency
Switching frequency
Output Specifications:
Voltage accuracy
Ripple
Noise
Short circuit protection
Over current protection
24VDC, 9~36VDC
48 VDC, 18~75VDC
p
(Pi) Network
1500VDC
>1000 Mohms
1000pF, typ.
±2%, max.
<0.2% Vout +20mVmax (Vp-p)
<0.5% Vout +50mVmax (Vp-p)
Current limit, auto-recovery
Works over 120% of rating
and recovers automatically
Line regulation (HL-LL) ±0.5%, typ.
Load regulation (10-100%) ±2%, typ.
Temperature coefficient ±0.02%/°C, typ.
78% to 82%
300KHz, typ. 100% load
Environmental Specifications:
Operating temperature
-25°C …+71°C
Storage temperature
-55°C …+105°C
Case temperature
+95°C, max.
Humidity (non-condensing)
Up to 95%
Cooling
Free-air convection
Specifications are subject to change without notification
72
Continued on next page
Physical Specifications:
Dimensions
31.8x20.3x10.2mm,
tolerance ±0.5mm
1.25x0.8x0.4inches
Weight
13g
Case material
Six-side shielded Aluminum
with Non-Conductive base,
Black Anodize
MTBF: > 800,000 hrs (MIL-HDBK-217F, Ground Benign, t=+25ºC)
TO ORDER CALL 1-888-9-AIMTEC
AIMTEC [ AIMTEC ]
