Series AMLD-Z
Up to 1000mA | LED Driver
General Specifications
Parameters
Switching frequency
Operating temperature
Storage temperature
Derating
Maximum case temperature
Thermal Impedance
Cooling
Humidity
Case material
Weight
Dimensions
(L x W x H)
MTBF
Maximum Soldering Temperature
NOTES:
Conditions
100% load
Typical
20 - 500
-40 to +85
-40 to +150
See derating curve
Maximum
Units
KHz
o
C
o
C
110
Free air convection
+30
Free air convection
o
C
C/W
o
95
Non-Conductive Black Plastic (UL94-V0 rated)
12.5
1.25 x 0.80 x 0.49 inches
31.75 x 20.32 x 12.45 mm
> 950 000hrs (MIL-HDBK-217 F at +25
o
C)
1.5mm from case for 10sec.
260
% RH
g
o
C
1. Reversed polarity at the input power will damage the driver. The input ground must not be connected to the negative output.
2. Leave the pin VADJ opened if not used, grounding VADJ will shut the driver off, connecting VADJ to +Vin will damage the driver.
3.
Maximum output open voltage is equal to input voltage.
Safety Specifications
Parameters
Agency approvals
CE
EN 55015 (CISPR22)
EN 61547
IEC 61000-4-2 (Perf.
Criteria A)
IEC 61000-4-3
(Perf.
Criteria A)
IEC 61000-4-4
(Perf.
Criteria A)
IEC 61000-4-5
(Perf.
Criteria A)
IEC 61000-4-6
(Perf.
Criteria A)
IEC 61000-4-8
(Perf.
Criteria A)
Standards
Pin Out Specifications
Pin
2
3
4
9
11
14
16
22
23
Single
- V Input
- V Input
Vadj
- V Output
- V Output
+ V Output
+ V Output
+ V Input
+ V Input
- DC Supply
- DC Supply
PWM/ON/OFF or not used
LED Cathode connection
LED Cathode connection
LED Anode connection
LED Anode connection
+ DC Supply
+ DC Supply
www.aimtec.com
F 051e R12.C
Tel: +1 514 620 2722
2 of 13
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
AIMTEC [ AIMTEC ]
