A1101, A1102, A1103,
A1104, and A1106
Continuous-Time Switch Family
ADDITIONAL APPLICATIONS INFORMATION
Extensive applications information for Hall-effect sensors is
available in:
•
Hall-Effect IC Applications Guide,
Application Note 27701
•
Hall-Effect Devices: Gluing, Potting, Encapsulating, Lead
Welding and Lead Forming,
Application Note 27703.1
•
Soldering Methods for Allegro’s Products – SMT and Through-
Hole,
Application Note 26009
All are provided in
Allegro Electronic Data Book,
AMS-702,
and the Allegro Web site, www.allegromicro.com.
1
2
3
4
5
V
CC
t
V
OUT
t
Output Sampled
t
PO(max)
Figure 2. Continuous-Time Application, B < B
RP
.. This figure illustrates the use of a quick cycle for chopping V
CC
in order to conserve battery power.
Position 1, power is applied to the device. Position 2, the output assumes the correct state at a time prior to the maximum Power-On Time, t
PO(max)
.
The case shown is where the correct output state is HIGH . Position 3, t
PO(max)
has elapsed. The device output is valid. Position 4, after the output is
valid, a control unit reads the output. Position 5, power is removed from the device.
Allegro MicroSystems, Inc.
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
www.allegromicro.com
8