Thermally Enhanced, Fully Integrated, Hall Effect-Based
Linear Current Sensor IC with 100 μΩ Current Conductor
ACS758xCB
Package CB, 5-pin package, leadform PSS
14.0±0.2
3.0±0.2
4.0±0.2
5
4
1.50±0.10
A
NNNNNNN
TTT - AAA
2.75±0.10
23.50±0.5
LLLLLLL
YYWW
13.00±0.10
4.40±0.10
1
Branded
Face
3.18±0.10
+0.060
Standard Branding Reference View
B
N = Device part number
T = Temperature code
A = Amperage range
11.0±0.05
0.381
–0.030
L = Lot number
1
2
3
Y = Last two digits of year of manufacture
W = Week of manufacture
= Supplier emblem
10.00±0.10
For Reference Only; not for tooling use (reference DWG-9111, DWG-9110)
Dimensions in millimeters
Dimensions exclusive of mold flash, gate burrs, and dambar protrusions
Exact case and lead configuration at supplier discretion within limits shown
7.00±0.10
A Dambar removal intrusion
B
Branding scale and appearance at supplier discretion
0.51±0.10
1.9±0.2
Creepage distance, current terminals to signal pins: 7.25 mm
Clearance distance, current terminals to signal pins: 7.25 mm
Package mass: 4.63 g typical
Copyright ©2008-2009, Allegro MicroSystems, Inc.
The products described herein are manufactured under one or more of the following U.S. patents: 5,619,137; 5,621,319; 6,781,359; 7,075,287;
7,166,807; 7,265,531; 7,425,821; or other patents pending.
Allegro MicroSystems, Inc. reserves the right to make, from time to time, such departures from the detail specifications as may be required to per-
mit improvements in the performance, reliability, or manufacturability of its products. Before placing an order, the user is cautioned to verify that the
information being relied upon is current.
Allegro’s products are not to be used in life support devices or systems, if a failure of an Allegro product can reasonably be expected to cause the
failure of that life support device or system, or to affect the safety or effectiveness of that device or system.
The information included herein is believed to be accurate and reliable. However, Allegro MicroSystems, Inc. assumes no responsibility for its use;
nor for any infringement of patents or other rights of third parties which may result from its use.
For the latest version of this document, visit our website:
www.allegromicro.com
Allegro MicroSystems, Inc.
115 Northeast Cutoff
16
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
ALLEGRO [ ALLEGRO MICROSYSTEMS ]
