Prosafe Trapped Key Interlock Switches
Slamlock Mechanical
Specifications
Standards
EN292-1&2, EN1088, IEC/EN60947-5-
1, GS-ET-19, ISO12100-1&2,
ISO14119, AS4024.1
Cat. 1 per EN 954-1 (ISO 13849-1)
Suitable for Cat. 2, 3, or 4 systems
BG, CE marked for all applicable
directives, and C-Tick not required
-40°C to +200°C (-40°F to +392°F)
In excess of 10
5
operations under
normal working conditions.
15.1kN (3398lbs)
14Nm (124lb•in)
95% RH
Single key version
Dual key version
Code Barrels
Ambient Working Temp
Material
Mounting
SSL
DSS
Max Holding Force
2 x M5 Counterbored from Top or
2 x M5 from Underside with Nuts
4 x M5 Counterbored from Top or
4 x M5 from Underside with Nuts
2000N (450lbs)
760gm (0.76kg (1.68lbs))
1332gm (1.33kg (2.93lbs))
Tested to 100,000 operations
-10°C to +50°C (14°F to +122°F)
316L Stainless Steel
Category
Approvals
Single
Dual
Operating Temperature
Mechanical Operations
Max Shear Force to Key
Max Torque to Key
Humidity
Weight
Description
The Prosafe Slamlock combines the features of trapped keys with
tongue actuated interlocks. When the actuator is inserted into the
interlock (guard closed), the trapped key can be rotated and
removed. With the key free, the actuator can not be removed thus
locking closed the guard door. The trapped key must be re-inserted
and rotated 90° to unlock the guard.
Slamlocks are manufactured in 316L stainless steel to provide a
rugged, industrial grade method of interlocking guard doors.
One advantage of the slamlock is that there is no need to run power
wires to the gate. Power is disconnected by a trapped key on a
control panel or by a Prosafe RKS type unit and the key is then
hand-carried to the gate by the operator.
The single key Slamlock (SSL) is used to interlock hatches, guards
and doors where full body access is not required.
Dual key Slamlock (DSL) is similar to the single key version but has
a secondary key to allow ‘2 key in’ or ‘key exchange’ conditions. The
key exchange version may be used where whole body access is
required, as the secondary key can be used as a personnel key.
Features
•
•
•
•
•
•
•
•
316L stainless steel construction
Selection of actuator types available
Single or dual key versions available
Direct drive operation
Replaceable code barrel assembly
Fitted with tamper resistant screws
Weatherproof stainless steel dust cap as standard
Conforms to EN 292, EN 1088, GS ET 19
The Prosafe Advantage
Stainless steel
construction.
5-24
ALLEN-BRADLEY [ Allen-Bradley ]
