February 2005
rev 1.4
ASM1810
Low Power, 5V µP Reset
- Active LOW, Push-Pull Output
Key Features
•
•
•
Low Supply Current
•20 µA maximum (5.5 V)
Automatically restarts a microprocessor after power failure
150ms reset delay after V
CC
returns to an in-tolerance con-
dition
•
•
•
•
•
•
Active LOW power-up reset
Precision temperature-compensated voltage reference and
comparator
Eliminates external components
Low cost TO-92 and compact surface mount SOT-23 pack-
age
Push-Pull output for minimum current drain
Operating temperature -40°C to +85°C
General Description
The ASM1810 is a voltage supervisor with low-power, 5V µP
active LOW Reset, Push-Pull output. Maximum supply current
over temperature is a low 20µA.
The ASM1810 generates an active LOW reset signal whenever
the monitored supply is out of tolerance. A precision reference
and comparator circuit monitor power supply (V
CC
) level.
Tolerance level options are 5%, 10% and 15%. When an out-of-
tolerance condition is detected, an internal power-fail signal is
generated which forces an active LOW reset signal. After V
CC
returns to an in-tolerance condition, the reset signal remains
active for 150ms to allow the power supply and system
microprocessor to stabilize.
The ASM1810 is designed with a push-pull output stage and
operates over the extended industrial temperature range.
Devices are available in low cost TO-92 and compact surface
mount SOT-23 packages.
Other low power products in this family include the ASM1811/
12/15/16/17, ASM1233D and ASM1233M.
Applications
•
•
•
•
•
•
•
Set-top boxes
Cellular phones
PDAs
Energy management systems
Embedded control systems
Printers
Single board computers
Typical Operating Circuit
Block Diagram
V
CC
2
V
CC
ASM1810
Microprocessor
RESET
RESET
Supply
Tolerance
Bias
ASM1810
+
-
Reference
Delay
150ms
Typical
1
RESET
GND
3
GND
Alliance Semiconductor
2575 Augustine Drive . Santa Clara, CA 95054 . Tel: 408.855.4900 . Fax: 408.855.4999 . www.alsc.com
Notice: The information in this document is subject to change without notice