SPECIFIC AT IONS
S19250
The sequence of operations is as follows:
Transmitter Operations
• 16-bit parallel input
• Parallel-to-serial conversion
• Serial data output
Receiver Operations
•
•
•
•
•
•
•
Serial input to limiting post-amp
Inter Symbol Interference (ISI) compensation
Threshold adjustment
Clock and Data recovery
Phase adjustment for improved BER
Serial-to-parallel conversion
16-bit parallel data and clock output
Enable Adaptive Post-Amplifier Offset Control
Compensates up to 24" of FR-4
MDIO
16
ASIC
16
AMCC
S19250
M
I
D
P
L
A
N
E
MDIO
AMCC
S19250
16
ASIC
16
Enable Adaptive ISI Mitigation
Figure 1. Mid-Plane Application Block Diagram
Enable Adaptive Post-Amplifier Offset Control
Enable Adaptive ISI Mitigation
Disable EDC
MDIO
ASIC
OR
FRAMER
OR
FEC
16
16
AMCC
S19250
XFP MODULE
Compensates up to 24" of FR-4
(Improves BER Performance and extends the reach of the standard XFP Module)
Figure 2. XFP Application Block Diagram
6290 Sequence Dr.
San Diego, CA 92121
P 858 450 9333
F 858 450 9885
www.amcc.com
For technical support, please call 1-800-840-6055 or 858-535-6517, or email support@amcc.com.
AMCC reserves the right to make changes to its products, its datasheets, or related documentation, without notice and warrants its products solely pursuant to its terms and
conditions of sale, only to substantially comply with the latest available datasheet. Please consult AMCC’s Term and Conditions of Sale for its warranties and other terms, conditions
and limitations. AMCC may discontinue any semiconductor product or service without notice, and advises its customers to obtain the latest version of relevant information to verify,
before placing orders, that the information is current. AMCC does not assume any liability arising out of the application or use of any product or circuit described herein, neither does
it convey any license under its patent rights nor the rights of others. AMCC reserves the right to ship devices of higher grade in place of those of lower grade.
AMCC SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, INTENDED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT APPLICATIONS, DEVICES OR SYSTEMS OR
OTHER CRITICAL APPLICATIONS.
AMCC is a registered trademark of Applied Micro Circuits Corporation. PowerPC and the PowerPC logo are registered trademarks of IBM Corporation. All other trademarks are the
property of their respective holders. Copyright © 2006 Applied Micro Circuits Corporation. All Rights Reserved.
S19250_PB2011_v1.03_20061031
AMCC [ APPLIED MICRO CIRCUITS CORPORATION ]
