AMIS-710226: 200dpi CIS Module
Data Sheet
1.0 General Description
The AMIS-710226 (PI226M-A4) is a contact image sensor (CIS) module using MOS image sensor technology for high-speed
performance and high sensitivity. The AMIS-710226 is suitable for scanning A4 size (216mm) documents with 8 dots per millimeter
(dpm) resolution. Applications include fax machines, game systems, variety of mark readers and other automation equipment requiring
document scanners.
2.0 Key Features
•
•
•
•
•
•
•
•
•
Light source, lens and sensor are integrated into a single module
8dpm resolution, 216mm scanning length
347µsec/line scanning speed possible with optional light sources
Yellow-Green LED light source, limits the typical line scan to 695µsec @ 2.5MHz
Wide dynamic range
Analog output
Compact size
≅
14mm x 19mm x 23mm
Low power
Light weight
3.0 Functional Description
The AMIS-710226 imaging array consists of 27 AMIS-720033 (PI3020) image sensors produced by AMIS, that are cascaded to provide
1728 photo-detectors with their associated multiplex switches and a digital shift register that controls its sequential readout. Mounted in
the module is one-to-one graded indexed micro lens array that focuses on the image of the scanned documents then transfers it onto
the sensors. The on-board amplifier processes the video signal to produce a sequential stream of video at the output pin of the AMIS-
710226 module.
Illumination is accomplished by means of an integrated Yellow-Green LED light source. All components are housed in a small plastic
housing which has a cover glass that acts as the focal point for the object being scanned, protects the imaging array, micro lens
assembly, and LED light source from dust. I/O to the module is the 10-pin connector located on one end of the module. For pin 1
location, see Figure 4.
The cross section of the AMIS-710226 is shown in Figure 1 and the block diagram in Figure 2.
AMI Semiconductor
– May 06, M-20543-001
www.amis.com
1
AMI [ AMI SEMICONDUCTOR ]
