欢迎访问ic37.com |
会员登录 免费注册
发布采购

AMIS-710239 参数 Datasheet PDF下载

AMIS-710239图片预览
型号: AMIS-710239
PDF下载: 下载PDF文件 查看货源
内容描述: 200DPI CIS模块 [200dpi CIS Module]
分类和应用:
文件页数/大小: 7 页 / 288 K
品牌: AMI [ AMI SEMICONDUCTOR ]
 浏览型号AMIS-710239的Datasheet PDF文件第2页浏览型号AMIS-710239的Datasheet PDF文件第3页浏览型号AMIS-710239的Datasheet PDF文件第4页浏览型号AMIS-710239的Datasheet PDF文件第5页浏览型号AMIS-710239的Datasheet PDF文件第6页浏览型号AMIS-710239的Datasheet PDF文件第7页  
AMIS-710239-A3: 200dpi CIS Module
Data Sheet
1.0 General Description
The AMIS-710239-A3 (PI239MC-A3-R) is a contact image sensor (CIS) module. It is a long contact image sensor, which uses MOS
image sensor technology for high speed performance. The AMIS-710239-A3 is suitable for scanning A3 size (307mm) documents with
eight dots per millimeter (dpm) resolution. Hence, there are 38 AMIS-720233 (PI3033B) image sensors in the module, providing a total
of 2432 pixels in a sequence. The sensors are 200 dots per inch (dpi) solid-state line imaging array, also a product of AMI
Semiconductor. Applications include document scanners, mark readers and other office automation equipment.
2.0 Key Features
Light source, lens and sensor are integrated into a single module
8dpm resolution, 307mm scanning read length
High speed page scan - up to 490µsec/line @ 5MHz pixel rate
Wide dynamic range
One analog output
Super super Red (630nm) LED light source
Compact size
20.5mm x 21.5mm x 324mm
Low power
Light weight
3.0 Functional Description
The AMIS-710239-A3 imaging array consists of 38 sensor chips in the module, which are sequentially cascaded to provide 2432 photo-
detectors with their associated multiplex switches and a digital shift register, which controls its sequential readout. Mounted in the
module is a one-to-one graded indexed micro lens array, which focuses the scanned documents to image onto its sensing plane. The
on-board amplifier processes the video signal to produce a sequential stream of video at the video output pin.
Illumination is accomplished by means of an integrated LED light source. All components are housed in a small plastic housing which
has a cover glass acting as the focal point for the object being scanned and protects the imaging array, micro lens assembly and LED
light source from dust. I/O to the module is the 10-pin connector, located on one end of the module. The cross section of the AMIS-
710239-A3 is shown in Figure 1 and the block diagram in Figure 2.
AMI Semiconductor
– Aug. 06, M-20610-001
www.amis.com
1