AMIS-710250: 200dpi CIS Module
Data Sheet
All components are housed in a small plastic housing and covered with a glass window. This cover glass not only serves to protect all
of the critical components within the housing from dust, but, along with micro lens, it determines the depth-of-focus because it lies in the
optical path.
4.0 Pin Out Description
There is one connector located at the end of the module. The outline of the module in Figure 4 of the mechanical section illustrates the
connector location. With the module window facing down on a flat surface, with the viewer looking down on backside of the module and
with the connector's pins facing viewer, the connector is located on the right-hand end of the module. The connector is a 1.25mm single
10-pin row. Its I/O designation is provided in Table 1. Pin number 1 location is indicated on the module outline.
Table 1: I/O Designation
Pin Number
Symbol
Vout
Gnd
Names and Functions
Analog video output
Ground; 0V
1
2
3
4
Vdd (+5V)
NA
Positive power supply
Not used
5
Gnd
Ground; 0V
6
7
SP
Gnd
Shift register start pulse
Ground; 0V
8
9
10
CP
GLED
VLED
Sampling clock pulse
Ground for the light source; 0V
Supply for the light source
AMI Semiconductor – May 06, M-20547-001
3
www.amis.com