欢迎访问ic37.com |
会员登录 免费注册
发布采购

AMIS-710317 参数 Datasheet PDF下载

AMIS-710317图片预览
型号: AMIS-710317
PDF下载: 下载PDF文件 查看货源
内容描述: 300DPI CIS模块 [300dpi CIS Module]
分类和应用:
文件页数/大小: 7 页 / 278 K
品牌: AMI [ AMI SEMICONDUCTOR ]
 浏览型号AMIS-710317的Datasheet PDF文件第2页浏览型号AMIS-710317的Datasheet PDF文件第3页浏览型号AMIS-710317的Datasheet PDF文件第4页浏览型号AMIS-710317的Datasheet PDF文件第5页浏览型号AMIS-710317的Datasheet PDF文件第6页浏览型号AMIS-710317的Datasheet PDF文件第7页  
AMIS-710317-A6: 300dpi CIS Module
Data Sheet
1.0 General Description
The AMIS-710317-A6 (PI317MC-A6) is a contact imaging sensor (CIS) module, which is composed of 13 AMIS-720321 (PI3021)
sensor chips. The AMIS-720321 is a 300 dots per inch (dpi) solid-state line imaging array, also a product of AMI Semiconductor. This
imaging device is fabricated using MOS imaging sensor technology for high-speed performance and high sensitivity. The AMIS-
710317-A6 is suitable for scanning A6 size (104mm) documents with 11.8 dots per millimeter (dpm) resolution. Applications include
ticket, check and card scanners, a variety of mark readers and other automation equipment.
2.0 Key Features
Light source, lens and sensor are integrated into a single module
11.8dpm resolution, 104mm scanning length
Up to 250µsec/line scanning speed, with 5MHz pixel rate
Wide dynamic range
Analog output
Yellow-Green LED light source
Compact size
14mm x 19mm x 120mm
Low power
Light weight
3.0 Functional Description
The AMIS-710317-A6 imaging array consists of 13 sensors that are cascaded to provide 1248 photo-detectors with their associated
multiplex switches and a digital shift register that controls its sequential readout. Mounted in the module is a one-to-one graded indexed
micro lens array that focuses the scanned documents to image onto its sensing plane. The on-board amplifier processes the video
signal to produce a sequential stream of video at the video output pin of the AMIS-710317-A6 module.
Illumination is accomplished by means of an integrated LED light source. All components are housed in a small plastic housing which
has a cover glass that acts as the focal point for the object being scanned and protects the imaging array, micro lens assembly and
LED light source from dust. I/O to the module is the 10-pin connector located on one end of the module. The cross section of the
AMIS-710317-A6 is shown in Figure 1 and the block diagram in Figure 2.
AMI Semiconductor
– May 06, M-20562-001
www.amis.com
1