欢迎访问ic37.com |
会员登录 免费注册
发布采购

AMIS-710403-A6 参数 Datasheet PDF下载

AMIS-710403-A6图片预览
型号: AMIS-710403-A6
PDF下载: 下载PDF文件 查看货源
内容描述: 400DPI CIS模块 [400dpi CIS Module]
分类和应用:
文件页数/大小: 7 页 / 239 K
品牌: AMI [ AMI SEMICONDUCTOR ]
 浏览型号AMIS-710403-A6的Datasheet PDF文件第2页浏览型号AMIS-710403-A6的Datasheet PDF文件第3页浏览型号AMIS-710403-A6的Datasheet PDF文件第4页浏览型号AMIS-710403-A6的Datasheet PDF文件第5页浏览型号AMIS-710403-A6的Datasheet PDF文件第6页浏览型号AMIS-710403-A6的Datasheet PDF文件第7页  
AMIS-710403-A6: 400dpi CIS Module
Data Sheet
1.0 General Description
The AMIS-710403-A6 (PI403MC-A6) is a contact imaging sensor (CIS) module, which is composed of 13 AMIS-720422 (PI3022)
sensor chips. The AMIS-720422 is a 400 dots per inch (dpi) solid-state line imaging array, also a product of AMIS. This imaging device
is fabricated using MOS imaging sensor technology for high-speed performance and high sensitivity. The AMIS-710403-A6 is suitable
for scanning A6 size (104mm) documents with 16 dots per millimeter (dpm) resolution. Applications include ticket, check and card
scanners, a variety of mark readers and other automation equipment.
2.0 Key Features
Light source, lens and sensor are integrated into a single module
16dpm resolution, 104mm scanning length
Up to 333µsec/line scanning speed, with 5MHz pixel rate
Wide dynamic range
Analog output
Red LED light source (660nm)
Compact size
14mm x 19mm x 120mm
Low power
Light weight
3.0 Functional Description
The AMIS-710403-A6 imaging array consists of 13 sensors, which are cascaded to provide 1664 photo-detectors with their associated
multiplex switches and a digital shift register, which controls its sequential readout. Mounted in the module is one-to-one graded
indexed micro lens array, which focuses the scanned documents to image onto its sensing plane. The on-board amplifier processes the
video signal to produce a sequential stream of video at the video output pin of the AMIS-710403-A6 module.
Illumination is accomplished by means of an integrated LED light source. All components are housed in a small plastic housing with a
cover glass, which acts as the focal point for the object being scanned and protects the imaging array, micro lens assembly and LED
light source from dust. I/O to the module is the 10-pin connector located on one end of the module (see Figure 4). The cross section of
the AMIS-710403-A6 is shown in Figure 1 and the block diagram in Figure 2.
AMI Semiconductor
– Jun. 06, M-20590-001
www.amis.com
1