AMIS-732128, AMIS-732256, AMIS-732512
50µm-pitch Wide Aperture Spectroscopic Photodiode Arrays
Data Sheet
1.0 Description
AMI Semiconductor’s WSN series is a family of self-scanning photodiode solid-state linear imaging arrays. These photodiode sensors
employ AMI Semiconductor’s proprietary CMOS image sensing technology to integrate the sensors into a single monolithic chip. These
sensors are optimally designed for applications in spectroscopy. Accordingly, these sensors contain a linear array of photodiodes with
an optimized geometrical aspect ratio (50µm aperture pitch x 2500µm aperture width) for helping to maintain mechanical stability in
spectroscopic instruments and for providing a large light-capturing ability. The family of sensors consists of photodiode arrays of
various lengths - 128, 256 and 512 pixels.
The WSN photodiode arrays are mounted in 22-pin ceramic side-brazed dual-in-line packages that fit in standard DIP sockets. A
diagram of its pin out configuration is seen in Figure 1.
Figure 1: Pin Out Configuration
2.0 Features
•
•
•
•
•
•
•
•
•
•
65pC saturation capacity for wide dynamic range
Wide spectral response (180 – 1000nm) for UV and IR response
NP junction photodiodes with superior resistance to UV damage
Low dark current
Integration time up to nine seconds at room temperature
Integration time extended to hours by cooling
High linearity
Low power dissipation (less than 1mW)
Geometrical structure for enhanced stability and registration
Standard 22 lead dual-in-line IC package
AMI Semiconductor
– Dec. 05, M-20491-001
www.amis.com
1