ABSOLUTE MAXIMUM RATINGS
Reverse Current
Forward Current
30mA
10mA
Storage temperature
-55°C to +150°C
265°C
Soldering information (25 sec.)
Operating Temperature Range
0°C to 70°C
ELECTRICAL CHARACTERISTICS
Electrical Characteristics at IR = 100 µA, and TA = +25°C unless otherwise specified.
AMS1004A-1.2
AMS1004B-1.2
Parameter
Conditions
Units
Min
Typ
Max
Min
Typ
Max
Reverse Breakdown
Voltage (Note 4)
1.231
1.235
1.239
1.220
1.235
1.250
V
IR - 100 µA
Reverse Dynamic
Impedance (Note 4)
Reverse Breakdown
Voltage Change with
current (Note 4)
0.2
0.60
1
Ω
IR - 100 µA, f = 20Hz
1.0
10
1.0
10
mV
10µA ≤IR ≤1mA
1mA ≤IR ≤20mA
Min. Operating
Current (Note 4)
8
10
20
8
10
20
µA
µA
Wide Band Noise
(Note 5)
IR - 100 µA,
10Hz ≤ f ≤ 10kHz
60
60
µV
ppm/°C
ppm
Temperature Coeff.
(Note 6)
25
50
Long Term Stability
(Note 5)
20
20
TA=25°C±.1°C
T = 1000 Hr
Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the
device is intended to be functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical
Characteristics. The guaranteed specifications apply only for the test conditions listed.
Note 2: For elevated temperature operation, Tj max is +100°C
Thermal Resistance
TO-92
SO-8
SOT-89
170°C/W (0.125” leads)
165°C/W
160°C/W
ϕ
JA (junction to ambient)
Note 3: Parameters identified with boldface type apply at temperature extremes. All other numbers apply at TA = TJ = 25°C.
Note 4: Guaranteed and 100% production tested.
Note 5: Guaranteed but not 100% production tested. These limits are not used to calculate average outgoing quality levels.
Note 6: The average temperature coefficient is defined as the maximum deviation of reference voltage at all measured temperatures between the operating
TMAX and TMIN, divided by TMAX - TMIN. The measured temperatures are 0°C, 25°C, 70°C.
Advanced Monolithic Systems http://www.ams-semitech.com
AMS [ Advanced Monolithic Systems Ltd ]
