AS1331
Datasheet - E l e c t r i c a l C h a r a c t e r i s t i c s
Table 3. Electrical Characteristics
Symbol
Thermal Protection
Thermal Shutdown
10°C Hysteresis
145
°C
Parameter
Conditions
Min
Typ
Max
Units
1. If the input voltage falls below this value during normal operation the device goes in startup mode.
2. The regulator is in startup mode until this voltage is reached. Caution: Do not apply full load current until the
device output > 2.3V
3. LBO goes low in startup mode as well as during normal operation if:
1) The voltage at the LBI pin is below LBI threshold.
2) The voltage at the LBI pin is below 0.1V and V
OUT
is below 92.5% of its nominal value.
www.austriamicrosystems.com
Revision 1.03
5 - 16