Data Sheet
AS1702 - AS1705
1.8W Single-Channel Audio Power Amplifiers
1 General Description
2 Key Features
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
2.7 to 5.5V (VCC) Single-Supply Operation
THD+N: 1.8W into 4Ω at 1% (per Channel)
Differential Input
The AS1702 - AS1705 are single-channel differential
audio power-amplifiers designed to drive 4 and 8Ω
loads. The integrated gain circuitry of these amplifiers
and their small size make them ideal for 2.7- to 5V-pow-
ered portable audio devices.
The differential input design improves noise rejection
and provides common-mode rejection. A bridge-tied
load (BTL) design minimizes external component count,
while providing high-fidelity audio power amplification.
Adjustable Gain Option (AS1702)
The devices deliver 1.8W continuous average power per
channel to a 4Ω load with less than 1% total harmonic
distortion (plus noise), while operating from a single 2.7
to 5V supply.
Internal Fixed Gain to Reduce External Component
Count (AS1703, AS1704, AS1705)
For reduced component designs, the devices are avail-
able with different gain levels as shown in Table 1.
ꢀ
ꢀ
ꢀ
<100nA Low-Power Shutdown Mode
Click and Pop Suppression
Table 1. Standard Products
Model
AS1702
AS1703
AS1704
AS1705
Gain
Adjustable (via external components)
AV = 0dB
Pin-Compatible to National Semiconductor LM4895
(AS1705) and Maxim MAX9718A/B/C/D
AV = 3dB
ꢀ
ꢀ
Operating Temperature Range: -40 to +85ºC
Package Types
AV = 6dB
Integrated shutdown circuitry disables the bias genera-
tor and amplifiers, and reduces quiescent current con-
sumption to less than 100nA. The shutdown input can
be set active-high or active-low. All devices contain click-
and-pop suppression circuitry that reduces audible
clicks and pops during power-up and shutdown.
- 10-pin MSOP
- 10-pin DFN
3 Applications
The devices are ideal as audio front-ends for battery
powered audio devices such as MP3 and CD players,
mobile phones, PDAs, portable DVD players, and any
other hand-held battery-powered device.
The AS1702 - AS1705 are pin compatible with the
LM4895 and the MAX9718A/B/C/D. The devices are
available in a 10-pin MSOP package and a 10-pin DFN
package.
Figure 1. Simplified Block Diagram
9
Single Supply 2.7
to 5.5V
VCC
4
10
+
–
IN+
OUT+
RL = 4 or 8Ω
2
6
IN-
OUT-
1
AS1702/AS1703/
AS1704/AS1705
SHDN
7
GND
3
SHDM
www.austriamicrosystems.com
Revision 1.47
1 - 20
AMSCO [ AMS(艾迈斯) ]
