AWU6616
APPLICATION INFORMATION
To ensure proper performance, refer to all related
Application Notes on the ANADIGICS web site:
http://www.anadigics.com
Shutdown Mode
The power amplifier may be placed in a shutdown
mode by applying logic low levels (see Operating
Ranges table) to the V
ENABLE
and V
MODE
voltages.
Bias Modes, Medium Bias Mode
The power amplifier may be placed in Low Bias mode
or a High Bias mode by applying the appropriate
logic level (see Operating Ranges table) to the
V
MODE1,
and V
MODE2
pins. The Bias Control table lists
the recommended modes of operation for various
applications.
Vcontrols
Venable/Vmode(s)
On Sequence Start
T_0N = 0µ
ON Sequence
RF
IN_800, IMT
notes 1,2
V
EN_800, IMT
V
CC/
V
CC
A
note 1
BS
T
_0N+1µS
T_0N+3µS
O
T
_0FF+2µS T
_0FF+3µS
O
8
Referenced After 90% of Rise
Time
Notes:
(1) Level might be changed after RF is ON.
(2) RF OFF defined as P
IN
≤ -30 dBm.
(3) Switching simultaneously between V
MODE
and V
EN
is not recommended.
Figure 3: Recommended ON/OFF Timing Sequence
LE
Referenced Before10% of Fall
Time
Data Sheet - Rev 2.3
02/2012
TE
Off Sequence Start
T_0FF = 0µ
Rise/Fall Max 1
µ
S
Defined at 10% to 90%
of Min/Max Voltage
OFF Sequence