ROHS
Compliant
Model A50A50X4
Chip Termination
50 Watts, 50
Ω
Description
The A50A50X4 is high performance Alumina (Al
2
O
3
) chip termination
intended as a low cost alternative to Beryllium Oxide (BeO) and
Aluminum Nitride (AlN). The termination is well suited to all cellular
frequency bands such as; AMPS, GSM, DCS, PCS, PHS and UMTS.
The high power handling makes the part ideal for terminating circulators
and for use in power combiners. The termination is also RoHS
compliant!
General Specifications
Features:
•
RoHS Compliant
•
50 Watts
•
DC – 4.0GHz
•
Al
2
O
3
Ceramic
•
Non-Nichrome Resistive
Element
•
Low VSWR
•
100% Tested
•
Small Size
Resistive Element
Substrate
Terminal Finish
Operating Temperature
Thick film
Al
2
O
3
Ceramic
Matte Tin over Nickel Barrier
-55 to +150°C (see de rating chart)
Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed
applicable portions of MIL-E-5400.
All dimensions in inches.
Electrical Specifications
Resistance Value:
Power:
Frequency Range:
Return Loss
50 Ohms
±
2%
50 Watts
DC – 3.5GHz
>26 dB DC - 2.7 GHz
>20 dB DC - 3.5 GHz
Specification based on unit properly installed using suggested mounting instructions
and a 50 ohm nominal impedance.
Specifications subject to change.
Outline Drawing
A50A50X4 (097) rev.F pg. 1 of 2
Available on Tape
and Reel For Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe
:
(315) 432-8909
(800) 544-2414
+44 2392-232392