RoHS
Compliant
Model C16A50Z4
Surface Mount Termination
16 Watts, 50
Ω
Description
The C16A50Z4 is high performance Alumina (Al
2
0
3
) surface mount
termination intended as a low cost alternative to Aluminum Oxide (AlN).
The termination is well suited to all cellular frequency bands such as;
AMPS, GSM, DCS, PCS, PHS and UMTS. The high power handling
makes the part ideal for terminating high power 90 degree couplers, and
for use in microstrip circuits. The termination is also RoHS compliant!
General Specifications
Features:
•
RoHS Compliant
•
16 Watts
•
DC – 4.0 GHz
•
Al
2
O
3
Ceramic
•
Non-Nichrome Resistive
Element
•
Low Return Loss
•
100% Tested
•
Small Size
Resistive Element
Substrate
Terminal Finish
Operating Temperature
Thick film
Al
2
O
3
Ceramic
Matte Tin over Nickel Barrier
-55 to +125°C (see de rating chart)
Tolerance is
±0.010”,
unless otherwise specified. Designed to meet of exceed
applicable portions of MIL-E-5400.
All dimensions in inches.
Electrical Specifications
Resistance Value:
Power:
Frequency Range:
Return Loss
50 Ohms,
±
2%
16 Watts
DC – 4.0 GHz
> 26 dB DC to 2.7 GHz
> 24 dB 2.7 GHz to 4.0GHz
Specification based on unit properly installed using suggested mounting instructions
and a 50 ohm nominal impedance.
Specifications subject to change.
Outline Drawing
C16A50Z4 (097) rev.E pg. 1 of 2
Available on Tape
and Reel For Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe
:
(315) 432-8909
(800) 544-2414
+44 2392-232392