ROHS
Compliant
Model G150N50W4A
Flange Mount Termination
150 Watts, 50
Ω
Description
The G150N50W4A is high performance Aluminum Nitride (AlN) flange
mount termination intended as a cost competitive alternative to Beryllium
Oxide (BeO). The termination is well suited to all cellular frequency bands
such as; AMPS, GSM, DCS, PCS, PHS and UMTS. The high power
handling makes the part ideal for terminating circulators, and for use in
power combiners. The termination is also RoHS compliant!
General Specifications
Features:
•
RoHS Compliant
•
150 Watts
•
DC - 2.7 GHz
•
AlN Ceramic
•
Non-Nichrome Resistive
Element
•
Low VSWR
•
100% Tested
Resistive Element
Substrate
Cover
Mounting Flange
Thick Film
AlN Ceramic
Alumina Ceramic
Nickel Plated Copper
Tolerance is
±0.010”,
unless otherwise specified. Designed to meet of exceed
applicable portions of MIL-E-5400. All dimensions in inches.
Electrical Specifications
Resistance Value:
Power:
Frequency Range:
Return Loss
50 Ohms,
±
2%
150 Watts
DC – 2.7 GHz
>26 dB to 2.0 GHz
>17 dB to 2.7 GHz
Specification based on unit properly installed using suggested mounting instructions
and a 50 ohm nominal impedance.
Specifications subject to change.
Outline Drawing
Lead Length: 0.150 Min
Rev. 10/12/05
Available on Tape
and Reel For Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe
:
(315) 432-8909
(800) 544-2414
+44 2392-232392
ANAREN [ ANAREN MICROWAVE ]
