ROHS
Compliant
Model H100NA20X4
Flange Attenuator
100 Watts, 20 dB
Description
The H100NA20X4 is high performance Aluminum Nitride (AlN) high power
flange mount attenuator intended as a cost competitive alternative to
Beryllium Oxide (BeO). The termination is well suited to all cellular
frequency bands such as; AMPS, GSM, DCS, PCS, PHS and UMTS. The
high power handling makes the part ideal for terminating circulators, and
for use in power monitoring. The termination is also RoHS compliant!
General Specifications
Features:
•
RoHS Compliant
•
100 Watts
•
DC - 2.7 GHz
•
AlN Ceramic
•
Non-Nichrome Resistive
Element
•
Low VSWR
•
100% Tested
•
Small Size
Resistive Element
Substrate
Cover
Mounting Flange
Operating Temperature
Thick film
AlN Ceramic
Alumina Ceramic
Nickel Plated Copper
-55 to +150°C (see de rating chart)
Tolerance is
±0.010”,
unless otherwise specified. Designed to meet of exceed
applicable portions of MIL-E-5400.
All dimensions in inches.
Electrical Specifications
Attenuation Value:
Power:
Frequency Range:
Return Loss
20 dB,
±
1.0 dB, DC – 4.0GHz
100 Watts
DC – 4.0 GHz
> 24 dB to 2.7 GHz
> 20 dB to 4.0 GHz
Specification based on unit properly installed using suggested mounting instructions
and a 50 ohm nominal impedance.
Specifications subject to change.
Outline Drawing
H100NA20X4 (097) rev.B pg. 1 of 2
USA/Canada:
Toll Free:
Europe
:
(315) 432-8909
(800) 544-2414
+44 2392-232392
ANAREN [ ANAREN MICROWAVE ]
