Model PD0922J5075D2
Rev D
Ultra Low Profile 0805 Power Divider
50Ω to 75Ω
Description
The PD0922J5075D2 is a low profile, sub-miniature Wilkinson power divider in an
easy to use surface mount package and is ideal for high volume manufacturing
while delivering higher performances than traditional printed and lumped element
solutions. It has been designed for the following markets: DVB-S, GSM, DCS, PCS,
WCDMA, GPS, 802.11a+g, Bluetooth, and Zigbee USA.
The PD0922J5075D2 is matched to 50Ω at the input and 75Ω at the outputs and
has a height profile of 0.8 mm. A two section Wilkinson design results in increased
isolation performance. Two external resistors are required for operation.
Components are available on tape and reel for high volume manufacturing pick and
place.
All Xinger components are constructed from ceramic filled PTFE composites which
possess excellent electrical and mechanical stability having X and Y thermal
coefficient of expansion (CTE) of 17 ppm/
o
C.
Detailed Electrical Specifications:
Specifications subject to change without notice.
ROOM (25°C)
•
•
•
•
•
•
•
•
•
•
•
Features:
950 – 2150 MHz
14 dB Isolation (output ports)
Good Return Loss
0.8mm Height Profile
50Ω Input/ 75Ω Output
External resistors required
Low Insertion Loss
Surface Mountable
Tape & Reel
Non-conductive Surface
RoHS Compliant
Parameter
Frequency
Input Port Impedance
Output Port Impedance
Return Loss
Insertion Loss*
Amplitude Balance
Phase Balance
Isolation (Output Ports)
Power Handling
Operating Temperature
Min.
950
Typ.
50
75
13
0.5
0.1
1
14
Max
2150
11
0.7
0.3
3
2
+85
12
-55
Unit
MHz
Ω
Ω
dB
dB
dB
Degrees
dB
Watts
ºC
* Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC)
Outline Drawing
Top View (Near-side)
.079
±.004
[2.00
±0.10
]
Side View
Bottom View (Far-side)
4X .026
[0.65]
.039
[0.98]
1
2
3
6X .009
[0.22]
6
5
6X .012
[0.30]
.021
±.002
[0.53
±0.05
]
.049
±.004
[1.25
±0.10
]
Orientation
Marker Denotes
Pin Location
Orientation
Marker Denotes
Pin Location
Pin
1
2
3
4
5
6
Designation
Mid 1
Input
Mid 2
Output 1
GND
Output 2
4
Dimensions are in Inches [Millimeters]
Mechanical Outline
Tolerances are Non-Cumulative
Available on Tape
and Reel for Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe
:
(315) 432-8909
(800) 411-6596
+44 2392-232392