Model RFP-100200A25Z50
Surface Mount
Termination
10 Watts, 50
Ω
Description
The RFP-100200A25Z50 is high performance Alumina surface mount
termination intended as a lower cost alternative to Aluminum Nitride (AlN)
and Beryllium Oxide (BeO). The termination is well suited to all cellular
frequency bands such as; AMPS, GSM, DCS, PCS, PHS and UMTS. The
high power handling makes the part ideal for terminating 90 degree
hybrid, directional couplers, and for use in isolators.
General Specifications
Features:
•
10 Watts
•
Lowest Cost
•
True Surface Mount
•
Alumina Ceramic
•
Non-Nichrome Resistive
Element
•
Low VSWR
•
100% Tested
Resistive Element
Substrate
Terminal Finish
Operating Temperature
Thick film
Alumina Ceramic
Thick film Silver
-55 to +125°C (see chart)
Tolerance is
±0.010”,
unless otherwise specified. Designed to meet of exceed
applicable portions of MIL-E-5400. All dimensions in inches.
Electrical Specifications
Resistance Value:
Power:
Frequency Range:
V.S.W.R.:
50 ohms,
±
2%
10 Watts
DC – 3.0 GHz
<1.25:1
Specification based on unit properly installed using suggested mounting instructions
and a 50 ohm nominal impedance.
Specifications subject to change without notice
Outline Drawing
100200A25Z50 (097) Rev C
Available on Tape
and Reel For Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe
:
(315) 432-8909
(800) 544-2414
+44 2392-232392