RF Amplifier
1 to 30 MHz
Model BXMP1050
FEATURES
• Ultra High Linearity
• High Output Power @ 1 dB Comp.
• High Reverse Isolation
• Environmental Screening Available
The Model BXMP1050 is standard high linearity amplifier covering 1 MHz to 30 MHz. This HF amplifier, utilizes a two stage,
high linearity push-pull design and a laser sealed housing for the ultimate in environmental protection. This standard design
may also be ordered in a screened MIL-STD-883 version as a model SXMP1050. All specification ratings are based on
measurements in a 50 ohm system with a DC supply voltage tolerance of +/- 2%.
Parameter
Frequency Range
Gain
Gain Flatness (+/-)
P
out
@ 1 dB Compression
Input VSWR
Output VSWR
Reverse Isolation
3rd Order Output Intercept Point**
2nd Order Output Intercept Point**
Noise Figure
Supply Voltage
Supply Current
**Intercept Point Values are Tested only at Midband.
*P
in
= +20 dBm max with output terminated at 50
Ώ
Typical
1 to 30 MHz
16 dB
0.5 dB
31.5 dBm
1.5:1
1.5:1
40 dB
+58 dBm
+113 dBm
6.0 dB
+24 volts
450 mA
Min. / Max.
1 to 30 MHz
15 dB /17 dB
0.5 dB Max.
+31 dBm Min.
1.6:1 Max.
1.6:1 Max.
-
+55 dBm Min.
+110 dBm Min.
7.0 dB
+24 volts
475 mA Max.
Revision: 9/24/2012
Housing Size
RF Connectors
Operating Case Temp. (Min./Max. Values)
Typical values are measured at 25°C but not guaranteed.
2.980" L x 3.905" W x 0.757" H
SMA Female
0°C to +50°C
Maximum (No Damage) Ratings
Storage Temperature
Operating Temperature (Case)
DC Voltage @ 25°C (Regulated)
Input Drive @ 25°C (CW)*
-65°C to +125°C
-40°C to +85°C
+25 VDC
+20 dBm
Spectrum Microwave, Inc. • PH: 888.553.7531 • Fax: 888.553.7532 • Email: sales@SpectrumMicrowave.com • www.SpectrumMicrowave.com
APITECH [ API Technologies Corp ]
