Program Your Own Correct-A-Chip™
GENERAL SPECIFICATIONS
• FEMALE SOCKET MATERIAL: black UL 94V-0 glass-filled 4/6 Nylon 170°C
continuous use temp.
• PCB: FR-4, 0.062 [1.56] or 0.094 [2.39] thick
• MALE PINS: Brass 360 1/2-hard per UNS C36000, ASTM-B16-00
• MALE PIN PLATING: 200µ [5.08µ] Sn/Pb 93/7 ASTM B579-73 over 100µ
[2.54µ] Ni per SAE AMS-QQ-N-290
• FEMALE PIN BODY: Brass 360 1/2-hard per UNS C 36000, ASTM B16/B16M
• 4-FINGER COLLET CONTACT: BeCu per UNS C17200, ASTM B194-08
• CONTACT PLATING: 10µ [0.25µ] Au per MIL-G-45204 over 50µ [1.27µ] Ni per
SAE AMS-QQN-290
• MINIMUM CONTACT CURRENT RATING: 1 amp @ 5VDC
CUSTOMIZATION:
In addition to the standard products shown
• OPERATING TEMPERATURE: 221°F [105°C]
on this page, Aries specializes in custom design and production.
• INSERTION FORCE: 180g/pin, based on a 0.018 [0.46] dia. test lead
Special materials, platings, sizes, and configurations can be
furnished, depending on the quantity.
NOTE:
Aries reserves the
• WITHDRAWAL FORCE: 90g/pin, based on a 0.018 [0.46] dia. test lead
right to change product general specifications without notice.
• NORMAL FORCE: 140g/pin, based on a 0.018 [0.46] dia. test lead
• SOCKET ACCEPTS LEADS: 0.015-0.025 [0.38-0.64] in dia.,
0.100-0.125 [2.54-3.18] long 0.015 dia. holes in PCB for #30
ORDERING INFORMATION
AWG Kynar
®
wire or equivalent
1109800-XX
MOUNTING CONSIDERATIONS
• Standard thru hole
ALL DIMENSIONS: INCHES [MILLIMETERS]
ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED
CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS
Series
No. of Pins
8, 14, 16, 18, 20, 22, 24, 28
Bristol, PA 19007-6810 USA
TEL (215) 781-9956 • FAX (215) 781-9845
PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED
18046
Rev. AA
ARIES [ ARIES ELECTRONICS, INC. ]
