AFE2000 SERIES
Single output
• Approved to EN61000, IEC-1000, UL1950,
CSA 22.2 No. 950-95
• Operating ambient temperature of 0°C to +50°C
• Complies with ETS300 132-1 and EN61000-3-2
• Hot-swap capability
• 11.5 x 6.75 x 4.9 inch size
• N+1 redundancy capability
• Extensive features available
• Compatible with AFS standard shelves for configuring
rack-mounted power systems
The AFE2000 power module is a rack mountable single phase AC to DC power
supply, designed to be a cost-competitive front-end power supply for distributed
power systems. It is particularly suitable for use in data processing, datacom and
telecom applications. The outputs are floating so the end user can ground the plus,
minus or neither depending on the end use application. The AFE2000 power modules
are designed for hot-swap operation and can be mounted into AFS4000/6000 power
shelves for redundant-mode operation.
[ 2 YEAR WARRANTY ]
SPECIFICATION
OUTPUT SPECIFICATIONS
Output voltage
Output power
Regulation
Turn-on
All specifications are typical at nominal input, full load at 25°C unless otherwise stated
EMC CHARACTERISTICS
±1.0%
±1.0%
2000W
12W
±3.0%
Conducted emissions
Radiated emissions
Immunity - conducted
Immunity - radiated
Immunity - ESD
Line harmonics
FCC-CFR, part 15, subpart B Class B
CISPR 22
Class B
FCC-CFR, part 15, subpart B (Note 7)
CISPR 22
(Note 7)
IEC1000-6
Level 2
IEC1000-3
Level 3
IEC1000-2
Level 3
per EN61000-3-2
Compliant
Main: 48/54.5/56.2VDC
Auxiliary: 12VDC
Main
Auxiliary
Line, load, IT, ageing
Output rise time
100 to 400ms
Turn-on (AC applied)
4s max.
Turn-on (inhibit removed)
1.5s max.
480mV pk-pk
100 to 3kHz
35dBrnC
60VDC max.
Delivers full power
Latch-off
Automatic recovery
Latch-off
±10%
GENERAL SPECIFICATIONS
Hold-up time
(See Note 1)
Efficiency
Isolation voltage
Input/output
Input/chassis
Output/chassis
150 to 170VAC
0 to 150VAC
500ms
20ms
86%
3000VAC
1500VAC
100VAC
200kHz
EN60950, IEC950, UL1950
CSA C22.2 No. 950
Electrolytic zinc coated CRS,
ASTM A591, light beige paint
5.0kg (11Ibs)
MIL-HDBK-217E
Demonstrated
150,000 hours
300,000 hours
Ripple and noise
(<50MHz)
Transmission noise
Overvoltage protection
Undervoltage protection >44.5VDC
<42VDC for >5s
Short circuit protection
Current sharing
Remote sense
INPUT SPECIFICATIONS
Input voltage range
Input frequency range
Input surge current
Safety ground
leakage current
Input current
Power factor
200/240VAC nom.
50/60Hz nom.
25°C cold start
254VAC @ 60Hz
220VAC, 2000W
<30s
>30s
Switching frequency
Approvals and
standards
Case material
Weight
Active current share
(50% to 100% loading)
1.0V max. distribution line loss
MTBF
170 to 264VAC
47Hz to 63Hz
22A
1.5mA max.
0.5mA typ.
10.5A rms
0.99 min.
ENVIRONMENTAL SPECIFICATIONS
Thermal performance
Cooling
Relative humidity
Altitude
Vibration
Shock
Operating
Operating
5Hz to 500Hz
Operating ambient
Non-operating
0°C to +50°C
-40°C to +100°C
Forced air
5% to 95% RH
13,000 feet max.
0.75G rms peak
15G, 1/2 Sine, 11ms
PAGE 1
ARTESYN [ ARTESYN TECHNOLOGIES ]
