AFS2400 and AFS4800
Rack Mountable Power Shelves
•
•
•
•
•
Front-end shelves for AFE1200 series power supplies
Distributed power architecture
UL and TUV approval
Hot-swap power system
N+1 redundancy
The AFS2400 and AFS4800 power shelves are designed to house Artesyn standard
AFE1200 series front-end power supplies. The shelves mount into standard 19 inch
racks. The power shelves accept full range (85 to 264VAC) AC power and deliver a
regulated DC bus voltage generated from the AFE1200 power supplies. The power
shelf provides input filtering and protection, and individual 20 Amp circuit breakers for
each AFE1200 power supply are provided on the front end of the shelf. An output bus
bar on the rear of the unit is provided for distribution of the main output to system
payload. Control, diagnostic and protection signals and the auxiliary output from
AFE1200 power supplies are routed through the power shelf to a parallel interface
connector on the rear of the unit. Clearance is provided on the rear of the unit to
maintain adequate airflow and cooling of the AFE1200 power supplies mounted within
the shelf.
[ 2 YEAR WARRANTY ]
POWER SHELF
AFS2400-2U2P
MAIN OUTPUT
POWER
2400W
N+1 REDUNDANT
POWER
1200W
HEIGHT
2U (3.5 inch)
AFE1200 POWER
SUPPLIES
2
SIGNAL
INTERFACE
Parallel via 25 pin D
type connector
AFS4800-4U4P
4800W
3600W
4U (7.0 inch)
4
Parallel via 37 pin D
type connector
AFS Power Shelf Characteristics
POWER MODULE
POWER SHELF
AFS2400-2U2P
AFE1200-96S48NA
48V @ 50A
AFE1200-96S24NA
24V @ 100A
12V @ 2A
24V @ 200A
12V @ 4A
AFS4800-4U4P
48V @ 100A
AFE1200 Output Configurations with AFS Power Shelves
Nominal Input Voltage
85VAC
120VAC
220VAC
240VAC
Line Current (Typical)
17.5A rms
12.1A rms
6.5A rms
6.0A rms
AC Input Line Cord Current
(for each AFE1200 module within power shelf)
PAGE 1
ARTESYN [ ARTESYN TECHNOLOGIES ]
