DPF1500 SERIES
Single output
•
•
•
•
•
•
•
•
•
Efficiency >90%
1500W front end
EN61000-3-2 compliant
12.6 x 6.5 x 4.9 inch size
Hot pluggable
N+1 redundancy
Full set of status signals
EN55022, EN55011 conducted emissions level A
UL, TÜV and CSA safety approvals
[ 2 YEAR WARRANTY ]
The DPF1500 is a 1500W universal input AC/DC front end power supply in a fully
enclosed hot pluggable case with built-in fan, handle, IEC input connector, on/off
switch and DIN output signal connector. Providing a single 57.8V output at full load
with a full set of status signals. The DPF1500 is designed for use as a front end in
medium power communication applications adopting distributed power architecture.
The DPF1500 provides 1500W of output power and is fully compliant with EN61000-
3-2. Standard features include current sharing and full protection against overvoltage,
overload and short circuit. Remote or local system monitoring is possible via a full set
of status signals that include fan fail, DC good, power fail, remote inhibit and current
monitoring. The DPF1500, with full international safety approval and the CE mark,
meets conducted emissions EN55022 level A. The DPF1500 can be used in
conjunction with our complete range of 3 to 200W DC/DC converters to fully configure
a distributed power system.
SPECIFICATION
OUTPUT SPECIFICATIONS
Voltage set point
Total regulation
Rise time
Transient response
All specifications are typical at nominal input, full load at 25°C unless otherwise stated
EMC CHARACTERISTICS
-57.8V ±0.1%
Radiated noise
Conducted noise
Harmonic current emm.
Electrical fast
transients/bursts
Surge susceptibility
EN55022/11, FCC part 15
EN55022/11, FCC part 15
EN61000-3-2
EN61000-4-4
EN61000-4-5
Level A
Level A
Compliant
Level 3
Level 3
Main output
FL to NL
At turn-on
Main output
50% to 100%
step at 1A/µs
Main output
0Hz to 20MHz
latching
±5.0%
1.0s, max.
12% max. dev.,
1ms recovery
to 1.0%
1.0V pk-pk
60V to 71V
1550W
GENERAL SPECIFICATIONS
Hold-up time
Efficiency
Isolation voltage
Switching frequency
Approvals and
standards
Weight
MTBF
ENVIRONMENTAL SPECIFICATIONS
Input/output
Input/chassis
240VAC, 60Hz FL
10ms @ 1500W
90% typ.
3000VAC
1500VAC
50kHz
EN60950, UL1950,
CSA C22.2 No. 950
6.9kg (15Ibs)
500,000 hours
demonstrated
Ripple and noise
Overvoltage protection
Output power limit
Short circuit protection
Current sharing
Capacitive load
Non-latching
Auto-recovery, 5A rms
max short circuit current
2V droop from 20%
to 100% rated load
24µF max.
INPUT SPECIFICATIONS
Input voltage range
Input frequency range
Input surge current
Input surge
Safety ground
leakage current
Input current
Input fuse
Power factor
220VAC, cold start
300VAC
230VAC, 50Hz
176VAC, 1500W
Non-replaceable
220VAC
176 to 264VAC
47Hz to 63Hz
40A max.
20ms
0.4mA
13A rms max.
15A
0.96 min.
Thermal performance
Operating ambient, FL
0°C to +50°C
Non-operating
-40°C to +85°C
50°C to 70°C ambient,
Derate to
convection cooled
50% load
Built-in fan
Non-condensing
Operating
Non-operating
5Hz to 500Hz
5% to 85% RH
10,000 feet max.
40,000 feet max.
2.4G rms peak
Cooling
Relative humidity
Altitude
Vibration
International Safety Standard Approvals
TÜV
VDE0805/EN60950/IEC950
UL1950 File No. E136005
PAGE 1
CSA C22.2 No. 950 File No. LR41062C
ARTESYN [ ARTESYN TECHNOLOGIES ]
