HPD15 SERIES
Single, dual and triple output
•
•
•
•
•
•
2.0 x 2.0 x 0.4 inch package (singles and duals)
2:1 wide input voltage range
30 models available including 2.1V and 3.3V outputs
Indefinite short circuit protection
EN55022 conducted emissions level A
Designed to meet EN60950 and IEC950
The HPD15 series of DC/DC converters offer 15 Watts of output power in a high
density 2 x 2 inch case. A range comprises 30 models with 2:1 wide input
voltages of 9-18V, 18-36V and 36-72VDC. Single, dual and triple outputs are
available with 2.1V and 3.3V single outputs suitable for low voltage logic
requirements. Standard features of the HPD15 series include indefinite short
circuit protection and undervoltage lockout. The series meets EN55022 level A
conducted and radiated emissions. In addition to this, all outputs are regulated
and isolated from the input. Typical applications are on board logic or analog
circuits supplied by telecom distribution power voltages, cellular and
telecommunications systems.
[ 2 YEAR WARRANTY ]
SPECIFICATION
OUTPUT SPECIFICATIONS
Line regulation
Cross regulation
All specifications are typical at nominal input, full load at 25°C unless otherwise stated
EMC CHARACTERISTICS
±0.3%
±1.5%
4.0% max.
5.0% max.
±0.2%
Isolation resistance
±4.0%
Isolation capacitance
Input/output
Fixed
Designed to meet
±2.0%
Switching frequency
180 to 220kHz
EN60950
IEC950
Input/output
Conducted emissions
Radiated emissions
EN55022, FCC part 15
EN55022, FCC part 15
Level A
Level A
LL to HL, singles and duals
LL to HL, triple output
Duals: asymmetrical load
10% to 100% FL
Triples: asymmetrical load
10% to 100% FL
Singles and duals:
10% to 100% FL
Triples: 10% to 100% FL
GENERAL SPECIFICATIONS
Efficiency
Isolation voltage
See table
Input/output
78% typ.
500VDC
10
9
Ω
1nF
Load regulation
Voltage accuracy
Minimum load
2.1V, 3.3V, 5V
50mA max.
Single 12V, 15V
20mA max.
Duals & triples, each output
10% FL
At start-up
20MHz bandwidth
3.0% max.
1.5% pk-pk, max.
20mV rms
±0.02%/°C
Hiccup mode
See Note 4
Indefinite
Approvals and
standards
Case material
Material flammability
Weight
MTBF
Overshoot
Ripple and noise
Temperature coefficient
Short circuit protection
Black coated, metal case
UL94V-0
65g (2.29oz)
MIL-HDBK-217F
300,000 hours
ENVIRONMENTAL SPECIFICATIONS
Thermal performance
9 to 18VDC
18 to 36VDC
36 to 72VDC
See table
8.5VDC
17VDC
34VDC
200ms
Relative humidity
Altitude
Vibration
Operating ambient
-10°C to +50°C
(See derating curve)
Extended temp.,
-25°C to +50°C
option, See Note 2
Non-operating amb.
-25°C to +95°C
Case
+95°C max.
Derating
See derating curve
Cooling
Free air convection cooled
Non-condensing
Operating
Non operating
5Hz to 500Hz
30% to 95%
10,000 feet max.
40,000 feet max.
2.5G rms (approx.)
INPUT SPECIFICATIONS
Input voltage range
12VDC nominal
24VDC nominal
48VDC nominal
Input current
Undervoltage lockout
12V nominal
(dual and triple outputs) 24V nominal
48V nominal
Start-up time
PAGE 1
ARTESYN [ ARTESYN TECHNOLOGIES ]
