NAN40 SERIES
Dual and triple output
•
•
•
•
•
•
5.0 x 3.0 x 1.2 inch package (1U applications)
Ideal for high volume designs
Industry standard package
Overvoltage and short circuit protection
40W with free air convection
EN55022, EN55011 conducted emissions level B
The NAN40 series are 40W universal input AC/DC power supplies on a 5 x 3
inch card with a maximum component height of 1.2 inch for use in 1U
applications. These series are available with a wide range of models in the
industry standard 5 x 3 inch footprint at low cost making the series ideal for new
and existing high volume communication and industrial applications. The
NAN40 series provide 40W of output power with free air convection cooling with
a peak output of 50W for a maximum duration of 60 seconds. The NAN40
series are designed for use in high volume low power data networking,
computer and telecom applications such as hubs, routers, POS terminals, cable
modems and PABX's. This list is not exclusive as the generic feature set of both
series with industry standard output configurations provide a solution for most
high volume applications including many industrial applications.
[ 2 YEAR WARRANTY ]
SPECIFICATION
OUTPUT SPECIFICATIONS
Line regulation
Total regulation
Overshoot/undershoot
Transient response
Temperature coefficient
Overvoltage protection
Output power limit
Short circuit protection
All specifications are typical at nominal input, full load at 25°C unless otherwise stated
EMC CHARACTERISTICS
±0.5%
±1.0%
±3.0%
±5.0%
<10%
±150mV max. dev.,
500µs recovery
±0.02%/°C
Conducted emissions
Radiated emissions
ESD air
ESD contact
Surge
Fast transients
Radiated immunity
Conducted immunity
EN55022, FCC part 15
EN55022, FCC part 15
EN61000-4-2, level 3
EN61000-4-2, level 4
EN61000-4-5, level 3
EN61000-4-4, level 3
EN61000-4-3, level 3
EN61000-4-6, level 3
level B
level A
criteria 2
criteria 2
criteria 2
criteria 2
criteria 2
criteria 2
Main output
Auxiliary outputs
Main output
Auxiliary outputs
At turn-on
+5.1V
(1.5A to 3A step)
Perf.
Perf.
Perf.
Perf.
Perf.
Perf.
GENERAL SPECIFICATIONS
Hold-up time
Efficiency
Isolation voltage
Switching frequency
Approvals and
standards
(See Note 8)
Weight
MTBF
MIL-HDBK-217F
Input/output
Input/chassis
110VAC
230VAC
10ms @ 40W
60ms @ 40W
68% min. @ 40W
3000VAC
1500VAC
Variable
VDE0805, EN60950, IEC950
BABT, IEC1010, UL1950
CSA C22.2 No. 950
200g (7.06oz)
150,000 Hours
+5.1V output
Primary power
limited
Multiple output
6.25V ±0.75Vout
50W Pout, min.
110W Pin, max.
30 seconds
INPUT SPECIFICATIONS
Input voltage range
Input frequency range
Input surge current
Safety ground
leakage current
110VAC, cold start
230VAC, cold start
110VAC, 60Hz
230VAC, 50Hz
Universal input
90 to 264VAC
120 to 370VDC
47Hz to 440Hz
15A
32A
0.2mA
0.4mA
ENVIRONMENTAL SPECIFICATIONS
Thermal performance
Operating
0°C to +70°C
Non-operating
-40°C to +85°C
0°C to 50°C ambient,
40W
convection cooled
50°C to 70°C,
Derate linearly
ambient conv. cooled
to half load
Peak (0°C to 50°C) max. 60s
50W
Non-condensing
Operating
Non operating
5% to 95% RH
10,000 feet max.
30,000 feet max.
International Safety Standard Approvals
VDE0805/EN60950/IEC950/IEC1010 File No. 10401-3336-1076
Licence No. 70567, 1076 and 90354
UL1950 File No. E136005
CSA C22.2 No. 950 File No. LR41062C
Certificate No. PS/605108
Relative humidity
Altitude
Vibration
Three orthogonal axes,
2.4G rms
random vibration, 10
5Hz to 500Hz
minute test for each axis
PAGE 1
ARTESYN [ ARTESYN TECHNOLOGIES ]
